Natural Science Industries Natural Science Smithsonian 900X Microscope Logo

Related Topics:

A
Anonymous Posted on Dec 10, 2010

I'm looking for Manual for fluorescence detector Spectroflow 980 Kratos

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do you use fluorescent gas leak detector fluid? I got a small tube with the gas line installation kit for my new range.

Adjust desired spray pattern. Spray to coat the suspected leak. Look for bubbles or foam. Microscopic leaks are indicated by foam, larger leaks produce larger bubbles.
0helpful
1answer

I have installed (or tried to) three different Leviton PR 180s in my front hall. All operated the 23 watt fluorescent bulb in the fixture satisfactorily, but were not affected by the ambient light; that...

The Leviton PR180 is a motion detector, or occupancy detector.
It senses infrared heat from a person's body.

I am looking at the manual from Leviton.

Maybe this will help:
There is a small adjustment screw under the wallplate where you can adjust light sensitivity.
Use fingernail or small screwdriver.
Turn control towards the "-" sign and lights will turn on in 'less lighting conditions'

I will be here for a few more hours.
Add a comment and I will help further is needed
0helpful
1answer

Broken Cord plug

you can buy new ones on ebay
0helpful
1answer

Psp hangs in cutscene persephone flying and kratos on her feet

I reinstalled the game in my psp and it worked. I was able to finish the campaign.
0helpful
1answer

Does the bel 980 need to be upgraded ??

BEL no longer offer upgrade or repair for the BEL 980 detector
0helpful
3answers

My bel 980 speaker quit working

On mine you can barely hear it on the 9 setting. I put in a different speaker but no difference. I did look up the number on the IC chip near where the speaker connects (34119) and it came back to a 500 mW audio amplifier, so you could probably replace that and fix it. I think it's what you call a flat-pack style chip. Not as bad as surface mount but will still require a tiny soldering iron. I think the actual part number ended up being MC34119D and should cost a dollar or less.
0helpful
1answer

Operating Voltage

It is 12 volt (or at least mine is). You should be able to connect directly to a fused supply, but I would advise checking output with a meter.
4helpful
1answer

How to open Bel 980 case

they are two on back thke the bottem then the top will come off the problem is there are two hinges in the front part on each side u have to compress each side with a very tiny flat head screwdriver. note be very careful this unit is not make to take apart easy but it can be done i have the same problem i am going to radio shack to see if the have the part for the voltage but first i am going to re sader the contection first. hope this works mark
0helpful
4answers

Bel 980 problem

I have the same thing wrong with mine ! I put it in my other car and it works fine. Found out it was my alternater was not working right! Hope this works for you
Not finding what you are looking for?

74 views

Ask a Question

Usually answered in minutes!

Top Natural Science Industries Toys Experts

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66969 Answers

john h

Level 3 Expert

29494 Answers

Are you a Natural Science Industries Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...