Hi I just have bought a new refrigerator and try to put it all together but there is none manual attached to. Does someone has an idea how I could get one? The fridge is 634L Haier 4 Door Fridge HFD647AS Thanks for response Richard

If the water feeding the refrigerator is good and strong then check the electrical connections on the water control valve where you installed the water line to the fridge. If the electrical connections are tight and still don't work have someone test the voltage to the valve where the plug attaches while someone presses dispense water. There are two valves on most refrigerators and they are made together so facing the valve the left is for water and right one is for ice. What is the model number of your refrigerator? Kenmore model numbers in the USA appear like this example=> 795.1234567
APPLIANCE 911

Hi there,
can you please post some pics of all the filter parts that need to be put back together to get an idea what type of filter it is ??

Thanks

G Man

A ten year old Black and Decker has about zero chance of working no matter what you do. Buy a new brand name drill.

IF it is new, go to the place that you bought it and see if they have a display model you can use to get an idea on how they attach. Take pics with your phone for reference

You don't need a user's manual, you need a service manual that gives details on taking apart the lens. I know of no source for such an old lens. Here a few links that may help:

http://ricehigh.blogspot.com/2011/01/disassemble-old-takumar-f-28-80-zoom.html

http://members.shaw.ca/hargravep/70-210.htm

However, with one of these lenses going for $20-$30 on eBay, I don't think it's worth a day's time to take one apart and put it back together.

Hope that helps,
Bax

Unusual, but try cleaninig the connections with a drop of white spirit or meths. also when putting the connections together give it a little twist as you push it together.

Hi Fumbling

You can try this Link, it will lead you to a .pdf manual to save/print/read.
Explanation about washing/detaching and attaching the fabric on page 9 "removing the seat pad".

Hope this will help you out!

Kind regards

When you say frame In my mind I see three sides attached, The door and front open, top with controls attached Like this maybe?
Smaller screws are innerframe longer outer in. You can do this! Just some minor set back...you got this far. Triangle Pieces I belive are corner protectors right and left lower, not positive tho. sorry. should be guide clips too, is the model bychance ending in W not M. Its hard to figure on what parts are left.... I will try to find you a diagram, other than the one attached


nice job changeing the Roller!

you can get diagram through this
link

new-car365.blogspot.com/2007_10_01_archive.html

get it & try to do with care

its take time it can happen if you do ..


THNX

My husband just thought the same thing and our owner's manual was attached to the metal cage that holds the mattres in place. However feel free to contact me and I can scan a copy to you. [email protected].