HOW TO SPOT A FAKE TAYLORMADE SUPERTRI DRIVER

From the link below:

Locking the head back in place with the torque wrench supplied free with the club, gives me four main settings to set up the trajectory:
*Towards L sets the club to give a maximum draw (presumably for those with a built slice or fade swing).
*Towards R sets the club for a controlled fade (for those who consistently over draw or pull tee shots)
*Neutral Upright (NU) delivers a slight draw (for those with a tendency toward a slight fade)
* Neutral (N) produces a slight fade (my preferred setting to counteract an occasional hook/pull)


Long term test TaylorMade R9 driver

Tuning Your TaylorMade R1 Driver in Three Steps

http://media.golfwarehouse.co.nz/media/TaylorMade%20R1%20Driver%20-%20Tuning%20Guide.pdf

Contact them and see.

The most common thing is a piece of epoxy glue broken off in there. The pro shop can drill a small hole in a non-stressed spot and squirt some glue in to trap the loose bit.

http://search.yahoo.com/search?p=How+do+you+Adjust+a+Taylormade+R1&ei=UTF-8&fr=chr-greentree_ff&ilc=12&type=994519

The following links contain reviews of the product. It may help you:
http://bettergolfswing.hubpages.com/hub/The-Taylormade-R11-Review
http://thesandtrap.com/products/taylormade-r11-driver/reviews

Hello,

I am sorry to hear about the trouble you are going through. I wrote a Tips and Tricks article here on FixYa that goes over how to request a refund. It will help you with this issue. Click the link below for the article.

PayPal - How do I get my money back?

Let me know if you need further assistance.

Regards,
G33k

On the link below will tell you how to adjust your driver.

http://taylormadedrivers.info/r9-taylormade-driver/

Good luck please rate 4 thumbs up and please leave a testimonial

Movable Weight Technology TM, is discretionary clubhead weight that can be easily redistributed by the player to change the characteristics of the club. By moving differently weighted cartridges, using a proprietary TaylorMade wrench, into strategically positioned ports, CG location can be optimized per golfer. Positioning more weight in the heel and less in the toe, speeds club head rotation during the forwardswing, which promotes a draw and/or reduces a slice.

Here is a link that will definately help you with the adjustment aspects of your club:
http://www.taylormadegolf.com/mainlevel/golfshop/drivers/R9-SUPERTRI.html#30

Hurry

I made my own from this page. RT Click on each picture and save. Then insert in word, resize, and Print

http://cgi.ebay.com/New-Taylormade-r7-Limited-Accessory-Kit-Wrench-Torque_W0QQitemZ130370475398QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item1e5aaf9586