Without the password, is their any possible way to uninstall this annoying software? Or obtain a password that you forgot? I have tried desperately to make a proxy, but failed. As well as manually deleting the system. Would be very happy if somone could teach me how to get rid of completely.

You may try pass0000 in case it was changed by system.

Also, it may be possible to use a hint feature if one was set.

Make sure you are connected to the internet before uninstalling K9 so your license is properly released. If this is not possible, you can continue to uninstall, but you will need to request a new K9 license if you choose to reinstall K9 in the future. Also, please make sure you are logged into your Windows Administrator user profile. Attempting to uninstall K9 from any other user profile than "Administrator" will not work.

1. Click [Start].
2. Click [Control Panel] (Note: if you cannot see this option, it may be under[Settings]).
3. Open [Programs and Features] (Note: This will be called [Add/Remove Programs] in Windows XP).
4. Locate Blue Coat K9 Web Protection in the list of programs and click once to highlight it.
5. Click [Change/Remove].
6. Click [Yes] when you are asked whether you want to completely remove K9. DO NOT ATTEMPT TO UNINSTALL K9 WITHOUT A PASSWORD. By design, K9 will block all internet access should one attempt to uninstall K9 without using a password. Attempts to modify K9 at the registry level will have the same effect.
7. Enter your K9 Administration password and click [Uninstall]. If you forgot your password, click the "Forgot Password..." link to have a temporary password emailed to the email address on file.
8. When prompted to reboot your computer, click [Yes].

After rebooting your computer, K9 will be completely uninstalled.

Solution
Please follow the instructions below to uninstall K9 Web Protection. Make sure you are connected to the internet before uninstalling K9 so your license is properly released. If this is not possible, you can continue to uninstall, but you will need to request a new K9 license if you choose to reinstall K9 in the future. Also, please make sure you are logged into your Windows Administrator user profile. Attempting to uninstall K9 from any other user profile than "Administrator" will not work.

1. Click [Start].
2. Click [Control Panel] (Note: if you cannot see this option, it may be under [Settings]).
3. Open [Programs and Features] (Note: This will be called [Add/Remove Programs] in Windows XP).
4. Locate Blue Coat K9 Web Protection in the list of programs and click once to highlight it.
5. Click [Change/Remove].
6. Click [Yes] when you are asked whether you want to completely remove K9. DO NOT ATTEMPT TO UNINSTALL K9 WITHOUT A PASSWORD. By design, K9 will block all internet access should one attempt to uninstall K9 without using a password. Attempts to modify K9 at the registry level will have the same effect.
7. Enter your K9 Administration password and click [Uninstall]. If you forgot your password, click the "Forgot Password..." link to have a temporary password emailed to the email address on file.
8. When prompted to reboot your computer, click [Yes].

After rebooting your computer, K9 will be completely uninstalled

There's no possible way to recover a lost/forgotten Deep Freeze password. But there are several ways to possibly disable/uninstall DeepFreeze.

Enterprise Version :
Deep Freeze Enterprise users can generate One Time Passwords (OTP) to gain access to deepfreeze. To generate an OTP,

1. Open the Deep Freeze login dialog on the system for which you need to generate the One Time Password.
2. Write down the Token code. It is located at the top of the login dialog.
3. Open the Deep Freeze Configuration Administrator and click the One-Time Passwords tab or open the Enterprise Console and click on Tools > One Time Password.
4. Enter the code you recorded into the Token field and click Generate OTP. Another code will appear in the OTP field. The second code is the password for the workstation.

The newly generated One-Time Password can then be used to disable, uninstall, and re-install Deep Freeze with the correct password.

For Deep Freeze evaluations (with no License Key entered) :

1. Restart the computer.
2. Enter the system BIOS settings.
3. Advance the clock by at least 60 days and then restart your computer. This will disable the software.
4. After the system has started, run the Deep Freeze installation program to uninstall Deep Freeze.
5. After the computer reboots, re-enter the BIOS and reset the clock to the current date. You can then re-install Deep Freeze after restarting.

If you are running a licensed copy of Deep Freeze Standard submit a ticket and we can look into the issue further to see if there are any other options avalalbe to assist you.

hi frz....
Final way it is if you will format c: then re install your window.. then you will see your log folder . you can access without password...
its a final way only.......

These are the official uninstall instructions:

Please follow the instructions below to uninstall K9 Web Protection. Make sure you are connected to the internet before uninstalling K9 so your license can be released. If this is not possible, you can continue to uninstall, but you will need to request a new K9 license if you want to reinstall K9 in the future.

1. Click Start
2. Click Control Panel. If you can't see this option, it may be under "Settings"
3. Click Add or Remove Programs
4. Find Blue Coat K9 Web Protection in the list of programs and click it once.
5. Click the Change/Remove button.
6. Click Yes when you are asked whether you want to completely remove K9. DO NOT ATTEMPT TO UNINSTALL WITHOUT A PASSWORD. By design, K9 will block all Internet access should one attempt to uninstall without using a password. Attempts to modify K9 at a registry level will have the same effect.
7. Enter your K9 administration password and click Uninstall. If you forgot your password, click the "Forgot Password..." link to have a temporary password emailed to you.
8. When asked whether to reboot your computer, click Yes

After rebooting, K9 will be completely uninstalled.

Solution

Please follow the instructions below to uninstall K9 Web Protection. Make sure you are connected to the internet before uninstalling K9 so your license can be released. If this is not possible, you can continue to uninstall, but you will need to request a new K9 license if you want to reinstall K9 in the future.

1. Click Start
2. Click Control Panel. If you can't see this option, it may be under "Settings"
3. Click Add or Remove Programs
4. Find Blue Coat K9 Web Protection in the list of programs and click it once.
5. Click the Change/Remove button.
6. Click Yes when you are asked whether you want to completely remove K9. DO NOT ATTEMPT TO UNINSTALL WITHOUT A PASSWORD. By design, K9 will block all Internet access should one attempt to uninstall without using a password. Attempts to modify K9 at a registry level will have the same effect.
7. Enter your K9 administration password and click Uninstall. If you forgot your password, click the "Forgot Password..." link to have a temporary password emailed to you.
8. When asked whether to reboot your computer, click Yes

After rebooting, K9 will be completely uninstalled.

You can find many solutions over the net but dont try it else the internet will be blocked.. just ask for a new password and they will mail you... You need to click on forgot password.

try CCcleaner for that one bro and uninstall the specified software or if you have no choice you can reformat your system or restore your system. God speed....

I have this same device and forgot my password also. The only solution you can do is format the drive and reinstall the software that came with the drive. I believe it warns you of this when installing a password on it, that if you loose or forget ur password the device will have to be reinstalled. the site to obtain the software is www.sandisk.com

Please leave comment thanks.]
If you need help in obtaining the software just email me at [email protected]

You need to boot off your OS installation CD, then click through the installation procedure (without installing) until you get to a menu that allows you to reset your administrative password.