Belt diagram for a 91 wrangler 2.5

http://serpentinebelthq.com/1991-jeep-wrangler-yj-4-0l-serpentine-belt-diagram/ her is a link for you to a diagram. I hope this helps

It would if there are 2 belts or more present. If it's a one belt setup it has one tensioner. Are you having trouble replacing a belt. Most auto parts stores will print you a belt diagram free of charge. Hope this helps. Chris

Click of the following direct, Free Link. It has several Serpentine Diagrams, including the one for your 1998 Jeep Wrangler 4.0L In-Line 6-Cylinders based upon your Engine Options (AC/No AC, Power Steering/No Power Steering, etc.).
The Link Page ALSO has the 2.5L In-Line 4-Cylinder Serpentine Belt Diagrams with their various engine options.
Included are the with AC / without AC Routing.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
http://www.2carpros.com/car_repair_information/year/1998/make/jeep/model/wrangler/1998_jeep_wrangler_drive_belt_routing_diagram.htm

Check HERE for few engine sizes:
- 1999 JEEP WRANGLER - L4 2.5L 150ci GAS FI N P
- 1999 JEEP WRANGLER - L6 4.0L 242ci GAS FI N S

Hope this help (remember comment and rated this post).

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/1999/make/jeep/model/wrangler/1999_jeep_wrangler_drive_belt_routing_diagram.htm

1997 JEEP WRANGLER - L4 2.5L 150ci GAS FI N P
Belt Routing Diagram Multiple Accessory, w/A.C.




More details in DAYCO Catalog

I hope help you woth this (remember rated this help).

1997 JEEP WRANGLER - L4 2.5L 150ci GAS FI N P

* Belt Routing Diagram Multiple Accessory, w/o P.S., w/o A.C.



* Belt Routing Diagram Multiple Accessory, w/P.S., w/o A.C.



* Belt Routing Diagram Multiple Accessory, w/A.C.




1997 JEEP WRANGLER - L6 4.0L 242ci GAS FI N S

* Belt Routing Diagram Multiple Accessory, w/o A.C.



* Belt Routing Diagram Multiple Accessory, w A.C.



For more details, you can visit DAYCO Catalog

I hope help you with this. Good luck (remember rated this help).

you have to pull on the tenssionner, and sould be a diagram right under the hood. if not, go on google and write serpentine diagram and you be able to see a jeep diagram!

you need to loosen the alternator bolts then turn the bolt under the alternator to relieve tension on the belt

Hi Saul,

I've got an '86 Cherokee Laredo 2.6L and a '91 Wrangler too. It's got a 4.0L inline six cylinder. But it has a serpentine belt.

Comment me back and tell me which components will be attached to the belt in question. That way I can tell you which of them gets used to install the belt.

You will need a socket set and a pry bar for the procedure.
Let me know
Mike