Mcculoch power washer fhh18a

Well, you know you can just buy one right? Try the links below:

You may contact the manufacturer, download manuals, check fuel/oil ratios, order parts, find your local service center, and view other resources using these links:

Contact us
User manuals
What is the correct fuel mixture for McCulloch products Chainsaw Trimmer...
McCulloch Service
McCULLOCH PARTS ACCESSORIES

I trust this information has proven beneficial.

You may contact the manufacturer, download manuals, check fuel/oil ratios, order parts, find your local service center, and view other resources using these links:

Contact us
User manuals
What is the correct fuel mixture for McCulloch products Chainsaw Trimmer...
McCulloch Service
McCULLOCH PARTS ACCESSORIES

I trust this information has proven beneficial.

for the motor you need to go by manufacturer's recommendation most pumps use 30w non-detergent oil with the dip stick screwed in

look for 2 things. 1. the GFCI button on the plug, you may have to press the 'reset' button to turn it on. 2. there may be a reset button on the motor or the unit somewhere this will usually be round, and often red, but maybe black also. hope this helps

I would guess there is a leak somewhere inside the unit that is spraying water on some electrical component and causing a ground fault.

From what i've read in the manual you need to fill both the pump and the motor. The pump itself will have a dipstick, the motor gets filled to the top. If the motor has two inlets one should fill up when you pour in the other side. Most briggs had two motor oil inlets so the motor could be used on several types of equipment. The pump itself should use about 9.6 oz

7228-H18A01

Go to this page: http://www.ordertree.com/ModelInfo.asp?Final=1&SiteID=1&Mfg=139&Model=FHH18A

Then click on the 4th link in the middle of the page with the part number above. Click "add to cart"

The list price is $35.93

Thanks for using FixYa.

Kelly

This part number is for the wand and hose assy 41 7228-H18A01 WASH MANCHINE HAND ***'Y

This is the manual I used: http://ipl.ordertree.com/ipl/604/FHH18A.pdf

It is available from this source: http://www.ordertree.com/ModelInfo.asp?Final=1&SiteID=1&Mfg=139&Model=FHH18A click on the 4th item with the part number above listed and add to cart. $35.93

The shipping fees are listed here: http://www.ordertree.com/cms/shipping-policy/14.html
$9.95 + $12/95 for Canada shipping

If this is not your model or not part of what you needed just respond here and I will get back to you. Please ensure you include your exact model number when responding.

Thanks for using FixYa.

Kelly

I assume you mean the rubber O rings inside the wand. I had to replace mine as well. I had to visit several plumbing supply stores to find one that fit. I ended up taking the end of the wand with me so I could make sure the O ring fit. The ring you are after is a number 5, but you need to make sure it is thick enough to make a good seal.

I need a manual for McCulloh 1600 PSI pressure washer > Its motor is working but there is no pressure