Question about Directed 434MHZ Remote Control

1 Answer

Remote codes for a cyberhome ch dvd 300 dvd player

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

  • Expert
  • 52 Answers

Looks like someone else answered this one already, so here's a link:
http://www.fixya.com/support/t186217-universal_remote_codes

Posted on Mar 12, 2008

1 Suggested Answer

  • 3 Answers

SOURCE: How do I program my universal remote?

Can I suggest maybe instead of trying to program your universal remote control, maybe a better solution is trying to buy the original replacement remote control for your Cyberhome DVD Player. I've been down this road before and eventually you'll be faced with not being able to find the solution and not left many other options. I went to http://www.everytvremote.com to buy a cheap replacement remote for my tv and got it within a week and didn't have to worry about programming the universal remote ever again!

Posted on Dec 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Universal Remote code for Cyberhome dvd


I have a Cyberhome remote control but no player, so I was about to bin the remote.  Send me your address and I will post it to you.  Email me at bus1& travers.net (replace & symbol with @ symbol).

Oct 07, 2008 | RCA Universal Remote Control

1 Answer

DVD code


The only codes I have for a CYBERHOME DVD are
0393,0985,0939

However I was not aware the RCU404 supported DVD players.
I know they support TV/VCR/CABLE BOX/SAT-AUX

If your attempting to set the DVD up as AUX...good luck.
Code Search Method
  1. Turn on the device you wish to program.
  2. Press and hold CODE SEARCH until the indicator light lights, then release.
  3. Press and release the device you are programming (tv,vcr, or dbs). The indicator light will blink once then remain lit.
  4. Press and release off-on until your device turns off. You may have to press off-on up to 200 times.
  5. When your device turns off, press the ENTER button and the indicator light will go off.

Apr 27, 2008 | Remote Controls

3 Answers

RCA RCU-404 UNIVERSAL REOMTE


CyberHome DVD 1024 1023 0816

Mar 02, 2008 | Remote Controls

1 Answer

How do I program my universal remote?


Can I suggest maybe instead of trying to program your universal remote control, maybe a better solution is trying to buy the original replacement remote control for your Cyberhome DVD Player. I've been down this road before and eventually you'll be faced with not being able to find the solution and not left many other options. I went to http://www.everytvremote.com to buy a cheap replacement remote for my tv and got it within a week and didn't have to worry about programming the universal remote ever again!

Nov 14, 2007 | Remote Controls

2 Answers

Jensen Jer-323


Thanks for the code to set the code you must hold down the tv button while pressing the code and the power button should light up after dailing the 4 digit code

Sep 07, 2007 | Jensen JER-323 Remote Control

1 Answer

I need a code for a Toshiba TV remote and a Cyberhome DVD Player


Try searching for your code. If it is not listed in the manual. Here are the instructions to search for your codes:
SEARCHING FOR YOUR CODE
If your device does not respond to the remote control after trying all codes
listed for your brand, or if your brand is not listed at all, try searching for
your code.
NOTE: Before performing a code search for a DVD player or a VCR, turn on the device and
insert the required media.
For example, to search for a code for your TV:
1. On the remote control, press TV once.
2. Press and hold SET until the LED (red light) blinks twice,
then release SET.
3. Enter 9 - 9 - 1.The LED will blink twice.
4. Aim the remote control at the TV and slowly alternate
between pressing POWER and TV. Stop when the TV turns off
(after pressing POWER). If the device does not have a Power
key, you can substitute another function, such as digits 0~ 9 ,
CH, or PLAY).
NOTE: In the search mode, the remote control will send IR codes from
its library to the selected device, starting with the most popular code
first.
5. To lock in the code, press and release SET.The LED will
blink twice.
6. To search for the codes of your other devices, repeat steps
1 through 5, but substitute the appropriate device key for
the device you are searching for.

Here is your manual:
http://www.ofausa.com/remote_manual/CTGAE3P%203021%20anual%20booklet.pdf

Aug 27, 2007 | One For All URC-3021 Remote Control

2 Answers

Adding a combo DVD/VCR player to my remote


you can find all the codes in this web site .. http://www.remote-codes.com/ please rate me if this work !

Jun 16, 2007 | Jensen JER-422 Universal Remote Control

Not finding what you are looking for?
Remote Controls Logo

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Directed Remote Controls Experts

Cindy Wells

Level 3 Expert

4754 Answers

andy williard
andy williard

Level 2 Expert

226 Answers

John Miller

Level 2 Expert

253 Answers

Are you a Directed Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...