Wireless internet My connection show signal strength is excellent but says with limited access i can not open internet explorer

Possibly the power outage caused your modem to reset. The wired connection would still work. first thing I would try is to reset the modem with the reset button, login to the management console and put in your network name and password again.

Go to control panel then click on internet options after the internet options window opens click on the advance tab then look at the bottom you will see reset. Click on reset then try to launch the IE again.

Follow this instructions:1. connect via hard wired connection using your PC (network cable)2. open your internet explorer or any browser.3. type the numbers 192.168.1.1 on the address bar4. you will be routed to your router's settings, type admin for USERNAME: and admin for PASSWORD.5. look for the basic setup/settings6. look for the wireless settings7. under your SSID comes the WEP or WPA-PSK option8. that is your wi-fi password, then modified it and remember the password you use for you will need to enter it on your pc when you are connecting via wireless connection.you can select ASCII for password. it should be alpha numeric or combination of letters and numbers.9. select save and apply. then you are good to go.

1.- Try to find the wireless card switch (or button). Look the wireless led indicator, must be on.
You should surf if the led is on.

2.- If not works, go to device manager and look to your wireless device and turn the switch on and
off again. Look if the device is accepted without any sign. If the device get any sign then you
have problem with your wireless driver. If no sign. Open My Computer and then open networks
or my network places, and try to access to any other computer you have.

3.- If the device is ok in device manager and the led indicator is on and you can access other
computer thru network places, then open Internet explorer, go to tools, then go to internet
options, then go to connections and there click on Lan settings. In the proxy section uncheck
the box. Restart your Internet Explorer and it must surf now.

Good Luck and remember to rate my answer.

Please check for the wireless signal strength of the wireless router.
Try to access the internet in an area where the signal is excellent.

try to use DNS 208.67.220.220 and 208.67.222.222
put this under your Wireless Lan properties.

If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

May I recommend you download Network Magic (a Cisco Product - same as Linksys) and l.et NM run its routine on your connection. Google it.

Free top download and use for eval period. read the deal at the web site

I use the paid pro version and I love it.

If WLAN and Wireless cards are enabled, then you may have to unplug your router for 10 seconds to reset it. They tend to build up a static charge. Unplug wireless router for 10 seconds, plug back in and you should be fine in a minute or two with full connectivity

• set the wireless settings first to no password first for this is a password issue most of the times
• and change the SSID name and channel not auto, set to 6 or 11
  

you can use the WinSock XP Fix tool to reset TCP/IP protocol to original state: http://www.snapfiles.com/get/winsockxpfix.html