Just installed new tv card and i keep getting "incorrect seriel number. I typed it just as it appears on the driver dic sleeve. what now?

Look on Amazon..for an older type remote..or go online..look up RCA..universal remote..your find the right code there...

Your machine was built on April 16th 2008


Kevin

Typically, if you are getting a "device not found" error upon trying to install an audio device driver, there are a number of issues that could be going on at one time.

First: You may have the wrong device driver or version of the device driver for the device intended for. Check the hardware version number and verify on the website of the hardware device (the audio card if it is an independent audio card that is what you are referring to) what is the latest revision of the driver. Download the driver and install it.

Second: If your device is an external audio card, make sure it's fully inserted into the PCMIA slot (seriel port if being used). If so, then accomplish the following procedure: Power down your PC. Remove the Audio Card and reboot PC. Allow PC to recognize no audio card, then shut down PC and reinstall Audio Card. Reboot PC and install with new Audio Driver

One of the two steps above should rectify the problem. If it doesn't, then the last resort is to assume the Audio card is faulty if it's an external Audio card.

If you have an internal Audio card, then there can be a faulty portion on the sound portion of the motherbood, which then would require the entire motherboard to be replaced. But before you result to this, be sure you have the newest Audio driver for the Audio Codec and installed correctly.

Please keep in mind, Conexant is an OEM supported Audio Codec and you need to refer to the maker of the PC itself for driver support. I.E. it may be a Conexant Audio chipset installed in a HP PC. So, be sure you go the manufacturer website such as "HP" for the audio driver support.

Hope this helps,

The installation program for the WINDVR 3 program isn't looking for the serial number of the TV Tuner card. It's needing your registration serial number when you paid for the software. I found a serial number that worked for me (after looking for 4 hours!!). Just enter this serial number and it should work for you. Be sure and put something down for your company name, also. Here is the serial:
kC7G94GSAE08A0S

contact a representative from the company.

If u want a new serial Number then mail me on [email protected].

I will definetly send you a new serial number of your own name.
plz dn't forget to rate my solution.

what type of program are you trying to install on the laptop?
it only means the serial number that is included with your program either not valid(used) or incorrect.

Use PC wizard (search and download) this will detect all drivers needed on your computer note name and number for your video card type into search engine IE ati x300 drivers for your operating system xp vista you should be able to download correct drivers
if does not work for you please leave reply what happens

is that the seriel number of the pc or the sound card?

If you get access to the soundcard (if it's PCI) get the FCC code off the card, if not look on the motherboard and the should be the manufator name, this will help track the driver down.

Keep in touch and I will rtry assist you,

x-b-m

Assuming you are running XP.

If it hasn't installed the device ,
uninstall device and reboot then restart
device should autofind and self install
dont forget to reboot to save settings,
Do SP2 Updates and reboot,

Let me know how it goes thanks

Please rate me ,,,Cheers