Jabra connection - Jabra BT350 Bluetooth Headset Headset

you may contact the service provider......

MY JABRA CONNECTS BUT I HAVE NO VOLUME I HAVE A
T-MOBILE PHONE. I RESET THE JABRA I TURN UP THE VOLUME ON MY PHONE NOTHING

MY JABRA CONNECTS BUT NO VOLUME TRIED TURNING UP PHONE TRIED RESETTING JABRA ALSO

my jabra handset is not connecting with my blackberry 9530

My solution is to connect the jabra audio jack to the speaker output of my receiver. Jabra need it to detect a source. If the connection to the source is cut, jabra waits around 30 seconds and if nothing happend jabra stop the transmittion. I hope that helps.

You can solve this by connecting your phone inline.
On the back of the phone where the phone handset plugs into, plug one end of the jabra headset wire & connect other end to the 2nd position (marked by phone & handset). Now plug the handset wire from Ip phone to the 1st position (marked by handset) in the jabra headset. Now you are good to go.

When the phone rings lift the phone handset and answer it with your jabra headset. You can't use jabra with 7941 without lifting the handset on phone.

BR, I had the same problem with my BT350 and my Razr V3c. I was finally able to resolve the problem by doing the following:
- delete BT350 from device list on Razr
- start Razr looking for device
- put BT350 in pairing mode while phone searching (hold answer button till solid blue light)
- phone will detect BT350 and retrieve name
- select Jabra BT350
- say 'yes' to bond with Jabra BT350
- enter passkey - 0000
- phone will connect with Jabra BT350

use passcode as default one
example 0000 ( four zeros)

Be careful of the earhook Jabra does not offer a replacement in the BT5010

http://jabra.pairx.co.uk/?l=28&pp=608

This is the answer to all....

Njoy
Kailash Rele