I am in need of drivers for Focus Tview Gold Card and if any software..Any body have it so please help me...thanks

It's possible the 'download from internet' request would work.

The dany website has no links for drivers, so it's not clear what drivers are available for various operating systems.

Some dany drivers, maybe the one for your card, are on this website: http://www.downloadcollection.com/freeware/dany-tview-tv-tuner-card-software.htm (Norton Internet Security says this website is safe.)

If you find them, download the dany drivers for your OS and install them on the Acer. Then retry whatever wasn't supported when you posted.

It is possible there are no drivers for your OS for this card. In that case, if you still want to do TV on your computer, you'll need to buy a new tuner card that is compatible with your OS.

Hi,
Please be informed that any hardware device needs a driver software to run within a PC, and the driver software depends on the Hardware Make/Model and the Operating System software you are using in your PC to operate it.You will get the Driver software of any hardware within the CD provided with the hardware part at the time of its purchase. The hardware may be an entire PC,Laptop,VGA card, sound card, LAN card etc.
If you do not have the CD or misplaced it somewhere then you need to download the driver software to get going. Thus you need to know all the above information to get the exact software your PC needs. As you have not mentioned the Hardware Make/model and Operating System you are using, i am unable to give you the direct download link.
However you can download the same by visiting the 'software downloads' section of the website of the hardware brand you have purchased. You just need to Google the name of the brand and visit their website and search for the download section.

If you feel that, my answers have helped you getting solution to your problems then please give a vote.

Thanks.

Go to this site.

http://www.focusinfo.com/support/downloads.asp#expand

This is the best solution for your problem as a 40 year experience with wires etc. Go to the source of your cable signal connector . Open it and clean the terminals with emery paper , sand the end of the cable shiny clean from corrosion , get a new barrel connectors with gold terminals if possible lengthen the ends of the cable , insert and tighten good, use thick rg-16 or rg 40 cable with good insulation ends crimped professionally with a crimpier or buy ready made , not from dollar store. Get a gold plated professional splitter if you need one or two , it will cost about 15 or more each . Make the cable runs as short as possible, using the thick good cables. If needed get a signal magnifier. From radio shack or the source etc. Connect them good and tight . Ground the splitters . Problem solved , you will get crystal clear channel 2 to 7 including 3 and 4 . Isolate the TV cable from other cables and power wires. Vitally

sounds like a bad cable. try a new cable.

THE S-VIDEO LOOK ALIKE IS ACTUALLY A PIN ADAPTER FOR AV JACKS. THE DVD MAKERS USE SPECIAL CONNECTIONS TO COMPLICATE ADDING TO MIXED SYSTEMS. (THEY WANT YOU TO BUY ONLY THEIR PRODUCTS!) REPLACEMENT ADAPTERS ARE AVAILABLE ONLINE @ http://www.tview.us/

well did u connect it right

Hi
I've fixed this trouble!

The driver fron Avermedia is OK , but software is'n working under XP.
I've fixed this, by means of Intervideo Windv r6. gold   Using windvr6 gold , my Avermedia m135-c card (Hybrid) is perfectly working (analogic and digital)
As usually, Windvr fixes anything!
Regards
HD

u hav to buy a hdma cable to solve ur problm....

i need for a msr206 24VDC /-10%, 2.0A Max., external power adapter attached