Hi. I have an old Kenwood Mixer A700 series model which is not working properly i.e. it is not putting enough pressure on to turn the mixer around. I think that it could be something to do with the motor. Do you have a repair manual or advice that you could give me in order to repair this?

[email protected], hi there guys, I want to lubricate my Kenwood A700 and would really appreciate your assistance as in what I must open and what type of lubricant would be suitable.

Hi BGR1,
I am also looking for info for info on a Kenwood Chef A700 which seems to have a motor brush problem if you could help I would appriciate it my email address is [email protected].
Regards Shane

no, you cannot adapt A700 to A900 because the level of the body where fit the motor is different.

Regards
Kenwood Chef Restore

Hi you can get the washers in Ebay, or in 4kenwood.co.uk
also check what model its your liquidiser, A700 , A900 or AT
regards

Hi. if you have a mincer without box, you cannot see the model, but. its simple know for what model fit.
you see in your mincer the connection shoulder have a pin.
if the pin its in the botton, its model A700 /701/702/703
if the pin its in the top. its for models A900 and ahead
click here for more info Kenwood Chef Restore

Hi ...
all Attachment for models A700D. A701 / A , A702, A703
NOT fit in models A900 ahead
anyway, the front of kenwood A900, and KM series its same, you can fit, but not of the models A700/701/702/703C
in http://www.kenwoodchefrestore.co.uk
you can see the compatibility of attachments
Regards

Hi,

There are not any new parts from Kenwood to A700 series, try to find it on internet or if anyone in the forum has one.

Hi,

where are you from, i have phone number to agents that still provide support for A700 series.

Hi,

Hard to find spare parts to A700 series.
Let me know where you are from then i can see if i can get a phone number to agents that still support A700 series.