How do i set my blueant supertooth in discoverable mode? Lost the book and got a new verizon phone. Thanks!

Step 1: Activate Pairing Mode on the Supertooth 3

Make sure the Supertooth 3 is turned off.
You can tell if the Supertooth 3 is on or off by looking at the light on the front. If the light is on or flashing, then the Supertooth 3 is on: turn it off by holding down the Multi-Function button (the green button) for about 5 seconds, until you hear the voice announce that the Supertooth 3 is powering down.
With the Supertooth 3 off, hold down the Multi-Function button for about 6 seconds, until the light on the front of the unit starts flashing red and blue.
The Supertooth 3 will now prompt you to select your language: press the Multi-Function button when you hear your language spoken.
The Supertooth 3 is now in pairing mode.


Step 2: Apple iPhone

Now you need to use your iPhone to search for Bluetooth devices:

Select Settings.
Select General.
Select Bluetooth.
Wait for your phone to search for devices, then select your BlueAnt device from the list.
If you are prompted for a PIN, enter 0000 (four zeros).
Select Connect.

Your BlueAnt device is now paired.

I GOT A SUPERTOOTH BUDDY CE0678 ITS PAIRING WITH MY PHONE BUT NOTHING HAPPENS NO MANUALS ETC PHONE SAMSUNG C303

To put the device into pair mode, hold the green button down for 5 seconds, after 5 seconds while still holding the green button release the mic arm. The device should then be in pair mode, if not the pair list may have become filled. To clear that hold down the vol + button for 5 seconds and release the mic arm. If you don't get any loud sound, power off the unit and hold the red button for 5 seconds while releasing the arm. Eventually you will get a red/blue flash telling you it is in pair mode (or what you call discoverable mode, which technically is referring to the phone). At that point go to the bluetooth menu, search/scan for devices/add a new device and enter the pin code 0000 if prompted.

Rylan

Make sure that your phone is visible to others as if it is not it wont find the speaker. Go to setting on Bluetooth and should be make discoverable to others. Ensure your phone in in pairing mode again in the Bluetooth settings.

Pairing Your BlueAntStep 2: Activate Pairing Mode on the Supertooth Light

1. If the microphone arm is open, close it to turn the Supertooth Light off.
2. Press and hold the answer button.
3. With the answer button held down, open the microphone arm.
4. The lights will start flashing red and blue, indicating that the Supertooth Light is in pairing mode.

You now need to activate Bluetooth

How to connect or pair a Blueant Bluetooth handfree.

1. Switch off the Blueant:
i.e. push the microphone inside the Blueant.

2a. Press and hold the GREEN telephone symbol (or Accept) pushbutton
On the Blueant flat face for 8 seconds. (this makes unit go into “pairing” mode)

2b. at the same time switch Power On to the Blueant by pushing out
the microphone on the side of the Blueant.

3.The Bluetooth Indicator will turn a blinking red/blue,
when you see this, release the Accept Button .
The Blueant is now in “pairing” mode.

4. Get you mobile in Bluetooth search mode to pair with a new device.


5. The Blueant will request your mobile device for a password.

6. Enter the password= 0000 , the devices now will be paired.

7. Set the Blueant as a trusted/authorized device, if this is option in your phone.

How to connect or pair a Blueant Bluetooth handfree.

1. Switch off the Blueant:
i.e. push the microphone inside the Blueant.

2. Get you mobile in Bluetooth search mode to pair with a new device.

3a. Press and hold the red telephone symbol pushbutton on
the Blueant flat face for 8 seconds.

3b. at the same time switch Power On to the Blueant by pushing out
the microphone on the side of the blueant.
6. The Blueant will request your mobile device for a password.

7. Enter the password= 0000 , the devices now will be paired.

How to connect or pair a Blueant Bluetooth handfree.

1. Switch off the Blueant:
i.e. push the microphone inside the Blueant.

2a. Press and hold the GREEN telephone symbol (or Accept) pushbutton
On the Blueant flat face for 8 seconds. (this makes unit go into “pairing” mode)

2b. at the same time switch Power On to the Blueant by pushing out
the microphone on the side of the Blueant.

3.The Bluetooth Indicator will turn a blinking red/blue,
when you see this, release the Accept Button .
The Blueant is now in “pairing” mode.

4. Get you mobile in Bluetooth search mode to pair with a new device.

5. The Blueant will request your mobile device for a password.

6. Enter the password= 0000 , the devices now will be paired.

7. Set the Blueant as a trusted/authorized device, if this is option in your phone.
For more detailed information download the Blueant manual from the link below:
http://www.blueant.com.au/knowledge/manuals.php
I hope it helps.

your phone and your headset may not be compatible, you can always call bluetooth or verizon to find out. Bluetooth: 877-668-6258
verizon: 800-922-0204

On your phone, try Settings > Connectivity > Bluetooth > (turn on) > Phone visibility (shown to all / on) > Search for devices >Choose headset (when located)
The password is 0000 (four zeros)

I don't have the link for the Super tooth II manual. but here's the link for the Supertooth One manual: (it may help)
http://www.supertooth.net/img/one/mdp_EN.pdf

You'll need Adobe reader to view it. It's free. Download here if you need it:
http://get.adobe.com/reader/

If you found this information helpful, please give me a big thumbs-up when you rate my answer. Thanks!