Apple iPod nano Logo

Related Topics:

Posted on Dec 06, 2007

Asking for unlock code i have tried reseting ipod pressing menu and select nothing seems to work

  • 2 more comments 
  • AdyPerea Dec 16, 2007

    i have forgotten my code to unlock my ipod. i have been trying to unlock it but it won't even turn on at all it went dead yesturday night and i have been connecting it to the computer n it wouldn't even turn on or send a singnal to the computer as the USB cable..

  • Anonymous Mar 26, 2008

    the volume wont go on

  • Usman Aziz
    Usman Aziz Mar 27, 2008

    my i pod lock 4 digit plz tell me what can i do

  • Anonymous Mar 28, 2008

    how do i unlock my volume

    i kant listen 2 my ipod

×

2 Answers

A

Anonymous

Go on itunes after pluggin it in on your pc then it comes up with its information about the ipod there is a button you click on there which resets it

there was another way i done it without itunes but i cant remember wot it is sorry if you cant find it but that is all i can remember anyway to cheer you up here is a joke

Q: what is the difference between a giraffe and a crane








A: one has hydralocs and the other has high bollocks

Anonymous

Level 1:

An expert who has achieved level 1.

MVP:

An expert that gotĀ 5 achievements.

Governor:

An expert whose answer gotĀ voted for 20 times.

Hot-Shot:

An expert who has answered 20 questions.

  • Contributor 35 Answers
  • Posted on Dec 07, 2007
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

MVP:

An expert that gotĀ 5 achievements.

Governor:

An expert whose answer gotĀ voted for 20 times.

Hot-Shot:

An expert who has answered 20 questions.

Joined: Nov 04, 2007
Answers
35
Questions
0
Helped
14149
Points
66

You need to connect your ipod back to your computer and start itunes. it will automatically unlock the ipod so you can either put in a new code or disale it.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I don't know what happened but ipod does nothing. tried resetting (menu & select)(menu/select & select/play) not sure what else to do. plugged into computer and still nothing. please help

Welcome to Fixya

Try resetting the ipod by pressing the middle button and the menu button at the same time for 5 to 10 seconds. The ipod logo should appear after the reset has done.

Thank you for using FIxya!

If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

7helpful
2answers

I pod is blocked, everything seemed to be normal and now its stuck on playlist nothing seems to work, screen is alight though

Your iPod needs to be reset. 1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
2. Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 8 seconds. You may need to repeat this step.
Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.
0helpful
2answers

I need to unlock my ipod nano

for one make sure the lock button on the top of the ipod is slid to the left to unlock the ipod's buttons.

The default code for the screen lock is 0000 and if you are still having problems then reset it. with the instructions below.

  1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
  2. Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 8 seconds. You may need to repeat this step.
Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.
0helpful
1answer

My nano 4g will only respond to a shake, nothing else

have you tried to reset the ipod yet? I've included a step by step below just in case you are unfamiliar with reseting your ipod. Many user are LoL ;)


Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.) Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 8 seconds. You may need to repeat this step. Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.

If you are still unable to reset your iPod, use only one finger from one hand to press the Center (Select) button, and one finger from the other hand to press the Menu button.
0helpful
1answer

I have a 4gb ipod blue screen hour glass...nothing else.

Have you actually been holding down all buttons? If so you will want to reset the ipod. Just in case you are unsure as to how to reset the ipod I have posted a step by step below. Hope it helps you :)


Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.) Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 8 seconds. You may need to repeat this step. Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer.
1helpful
1answer

Ipod nano 8gb

First thing to try is a reset

To reset your iPod:
  • 1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
  • 2. Press and hold the Menu and Select buttons until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.
0helpful
1answer

I plugged my IPOD NANO IN TO THE COMP AND ALL **** SET LOOSE, THE IPOD ASKED FOR A RESTORE, WHICH I CARRIED OUT, I THEN EJECT AND ALLS FINE, THEN I RE ATTACH IPOD AND START INSTALLING 1 OR 2 ALBUMS TO...

Try resetting the iPod, this usually works.

As follows:

How to reset iPod To reset an iPod with a Click Wheel, including:iPod nano (3rd generation) iPod classic iPod (5th generation) iPod nano (2nd generation)iPod nano iPod with color display (iPod photo) iPod (Click Wheel) iPod mini iPod mini (2nd generation)

Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 8 seconds.

You may need to repeat this step. Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.

If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.

To reset iPod, iPod (scroll wheel), iPod (touch wheel), and iPod (dock connector)Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)Press and hold the Play/Pause and Menu buttons simultaneously until the Apple/iPod logo appears, about 6 to 8 seconds. You may need to repeat this step.

If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.

If you are still unable to reset your iPod, use only one finger from one hand to press the Center (Select) button, and one finger from the other hand to press the Menu button.When you reset iPod all your music and files are saved, but some customized settings may be lost. Date and time is preserved (unless the iPod reset itself because it had no power and then was reconnected to power). Other customized settings, such as Bookmarks, On-The-Go Playlists, Shuffle, Backlight timer, and so forth are preserved from the last time the hard drive turned on.
148helpful
14answers

Apple iPod Model A1136, 30 GB.

First make sure your hold switch isn't on. It's on the top or bottom and slides back and forth. It needs to be switched to the left. Once it is to the left, here's how you reset:

You can reset your ipod by holding down the menu and select (round button in the center) buttons down for at least 10 seconds. You'll see an apple logo flash, that's when you stop pressing the buttons. It will shut off, then back on.
1helpful
2answers

Problem unlocking

need help lock 8gb ipod need big help now
0helpful
2answers

I FORGOT MY CODE

To reset an iPod with a Click Wheel, including: ipodnano3.jpg ipodclassic.jpg icon_ipod_5g.gif ipodnano2.jpg ipodnano.jpg ipodphoto.gif ipodg4.gif ipodmini.gif
  • iPod nano (3rd generation)
  • iPod classic
  • iPod (5th generation)
  • iPod nano (2nd generation)
  • iPod nano
  • iPod with color display (iPod photo)
  • iPod (Click Wheel)
  • iPod mini
  • iPod mini (2nd generation)
  1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
  2. Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 8 seconds. You may need to repeat this step.
Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.
Not finding what you are looking for?

252 views

Ask a Question

Usually answered in minutes!

Top Apple Audio Players & Recorders Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you an Apple Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...