I have a teac smart tv and it is stook on initializing and I can not get a anything on it. can you please help me to get it off.

Have you tried any other sound inputs Stacey?

Are you using just the speakers (designated DV-200) or the full
Teac DV-C200 DVD Audio/Video Micro System?

You would need the digital optical cable out from the television to a digital optical cable input on the DV-C200 system. Digital is not like a normal signal in the way that analogue AM radio and FM digital radio differ. In fact it is more like DAB radio.

The best thing to do it Google the manual for the television and the speaker system and read the input and output specs.

https://www.google.com/search?q=TEAC+DV-200+speakers

..

Yes, you can change channels without the remote, if your TV source is OTA. Find the joystick button on the back of the TV; I believe it's on the left side as you look at the TV screen. Press the center of the button. You should see an information banner. Push the button up or down to scroll through the list of available channels. (If you press the center of the joystick twice, you will see the source list.)

This is from the manual for the TEAC LE55A518UHD which I found here: https://www.teac.com.au/wp-content/uploads/2019/09/TEAC_A518_series_IM.pdf .

I hope this helps.

Cindy Wells

Have you gone to menu and to your network?
Have you seen the option Wireless Network.
Have you searched you network and connected it.
If you have a pass word to your wireless you will have to enter it into your tv and connect it?

Contact TEAC to request assistance.

http://www.teac.com.au/support/

1300 55 33 15 (for warranty support)

• Press "1" for Warranty Claims lodgement
• Press "2" for Spare Parts purchase
• Press "3" for product and technical support

75 Northgate Drive, Thomastown, VIC 3074
[email protected]

http://www.teac.com.au/support/contact-customer-care/

Online form to request support.


Support TEAC

Kerry, the problem is in the communication of the smart box. Who ever did the ORGIINAL setup when initially installed, should recall how it was done and do it all over again. Other than that, refer to you TV Box manual, or contact the box maker for assistance.

You can call (800) 447-8322 to find a Teac authorized service center in your area. If you are unable to find a repair person in your area you can call the company directly at (323) 726-0303. http://www.teac.com/support/warranty

Contact 1300 55 33 15, option 1. Ask for the PDF that contains the link for the firmware and Instructions to load it. We will email it to you....AUSTRALIA

You're in luck - try each of these 4 digit codes for TEAC TV:
1627 1085 1152 1154 1165 1168 1171 1181 1183 1193 1283