Reset Uniden G455 security system monitor to factory settings please?

To reset the Uniden GMR1938-2 radio and turn off monitor mode, you can follow these steps:
1. Turn off the radio by pressing and holding the Power/Menu button until the unit powers down.
2. Once the radio is turned off, press and hold the Menu button.
3. While holding the Menu button, turn on the radio by pressing the Power/Menu button. Keep holding the Menu button until the display shows the Reset prompt.
4. Use the Channel Up or Channel Down button to navigate to the Reset option.
5. Press the Menu button to select the Reset option.
6. The display will show a confirmation message asking if you want to reset the radio. Use the Channel Up or Channel Down button to select "Yes" and press the Menu button to confirm.
7. The radio will reset to its factory default settings, including turning off the monitor mode.
After performing the reset, the monitor mode should be turned off on your Uniden GMR1938-2 radio. You can now use the radio normally without the monitor function active.

If you have forgotten your password for your Uniden 4 camera home security system and are unable to access the system, there are a few steps you can try to reset the password:

1. Check the user manual for your specific system model to see if it provides instructions for resetting the password. Some Uniden security systems may have a reset button or a specific reset procedure outlined in the manual.
2. Contact Uniden customer support for assistance. They may be able to provide you with a default password or walk you through the process of resetting the password.
3. If the above steps do not work, it may be necessary to perform a factory reset on the system. This will erase all settings, including the password, and restore the system to its default configuration. To perform a factory reset, you may need to locate the reset button on the system or follow a specific reset procedure outlined in the user manual.

It is important to note that performing a factory reset will erase all settings and may require you to set up the system again from scratch. It is recommended to carefully consider this option and, if possible, try the other steps first.

Bruce - I found the manual for the system. Your answer may be in here. The system does permit remote viewing from a PC or Apple. Check out the info.

https://www.manualslib.com/manual/388611/Uniden-Guardian-G455.html#manual

PDF]Video Surveillance System G955 User's Guide - Uniden

https://www.uniden.com/File%20Library/.../G955om.pdf

UnidenIf you need assistance, please do NOT return this product to your place of purchase. ..... unbent paper clip to press RESET and reset the monitor. ..... set up your securitycode to limit who can have access to the system from a remote location. 1.

[PDF]UDR744 Manual - Uniden

https://www.uniden.com/File%20Library/.../UDR744om.pdf

UnidenIf you need assistance, please do NOT return this product to your place of purchase. ..... For further information on video surveillance and audio recording legal requirements, ... Direct connection to router for remote access to live and recorded video ..... Enter the UID code from your UDR744 monitor in the UID field.

G955 Uniden Video Surveillance System - Uniden Support

Here is the link where you can locate the owner's manual: https://www.uniden.com/product-information/owners-manuals

you need to use one or the other at one time

You need to buy a new memory card or to erase files on the current one you have on the device.

http://www.manualslib.com/manual/388611/Uniden-G455.html

Demo equipment is often sold, usually at much reduced price and as long as you get a warranty of some sort and it is proven to work. Then there is no reason you cannot use it

Master Reset or Factory Reset

When Factory Reset is performed, the setup value will factory default setting
When initialization starts.

1.Select System Setup from Menu Screen.
2.From the System setup submenu, Set Factory Reset to ON
3.When you exit Menu, The phrase FACTORY RESET Appears on the monitor and
The Initialization starts.{ON/OFF} Use arrows UP-- DOWN & , kEY TO MAKE CHANGES
HOPE THIS HELPS