We are defrosting our Brada chest freezer model Hs-129C/HS 185 c/HS-258C. ( don't know which one from manual ) The manual has no diagrams, but says to put a shallow tray below the drain plug .

order seal and dont take door off do not need to

Is the freezer working first off?

Here is the manual. I am still looking for the schematic. the manual does have a god troubleshooting section. http://scooterland.net.au/wp-content/uploads/2015/08/User-Manual-HS-589.pdf

Midea Customer Service 866/646-4332
I bought my freezer in 2014 and this number is from the instruction manual

www.dl4all.com/yzt/tag/hs+3245.html

Information on your CTM HS-2800 is here:

http://www.ctmhomecare.com/Products/index_Detail.asp?tStyle=0202&PModel=HS-2800


Your User Manual is here:

http://www.ctmhomecare.com/PDF/Owner_Manual/User%20Manual-2800%20USA.pdf

You didn't specify of its a 61 or a 61 Rancher. Here's the info you need to take to your Husky dealer. The diagram will be with the major repair kit.
Model 61, then the 61 Rancher:
CARBURETOR Model 61: Tillotson HS-163A, B , HS-254A series or
Walbro WS series MAJOR REPAIR KIT: RK-23HS for HS-163A MINOR REPAIR KIT: DG-5HS/T for HS-163A

CARBURETOR Model 61 Rancher: Tillotson HS-163A series or
Walbro WS-17A, B series MAJOR REPAIR KIT: RK-23HS
K10-WS MINOR REPAIR KIT: DG-5HS/T
D10-WS

If all is ideal maybe -10 an occationally -15 and this is F considerable coolder than -20C. ALSO fyi a chest freezer will stay at or below these temps better than an upright and especially a self defrosting model. Because a chest freezer you dont loose all the cold air when you open the door. TYhey are not made in auto matic defrost as far as I know (never have seen one but then I havent been looking for one either. An up right freezer can be manual defrost or automatic. but the cold air falls ouit every time the door is opened.

Please let em know if this helps you by giving me as high a mark as you can and thank you for using fixya.

The reason this happens is because the defrost timer is not turning back on when it needs to, causing the freezer to thou out and overfill the drip tray sitting on top of the compressor. A new defrost timer should be available from the local refrigeration wholesalers in your area.

I want repair my HS-23 headset. But I haven't that's wiring diagram.