My touch screen on d5163 stopped working everything is working but can't touch the screen so I can't change anything on my eonon d5163 why is that?

Hi,

please shut down the device for a few 10 minutes and retest your device. If issue still exists, please perform a factory reset to fix the issue. Thank you.

I Just bout an r32 mk5 golf 4motion and it has eonon unit. The touch screen not working I can not move up or down the icons to turn blue tooth on. Or anything cant select between USB stick and sd card and not showing any maps the touchscreen not in any operation at all. Has anyone had this issue

I have a mazdaspeed 3 with bose system 10 speakers, and the D5163 works without any special wiring

hi, i bought eonon E1012 on Eonon official, i also changed the wire so as to watch car DVD, but everything turn out to be fine.
I think maybe you have connect the wrong wire and have bum out the built in amp.

try changeing the yellow an red wires

I had that problem and I looked for someone who can fix the flex cable, mine's working now. He told me the part of the flex cable is seated on a chip and it was burnt due to overheat.

you could just try disconnecting power overnight and see if it resets then. sometimes pushing reset doesn't always completely clear the memory.

You have only conected the live feed, that will cause the light to come on but not switch on. You must conect the switched live feed as well, then it will turn on.

Good luck

The brown wire, safety ground? needs to connected the ground (-ve), or the vechiles chassis, this a saftety circuit so it wont work unless this wire is wired to the negative of the battery.