Huawei ascend y530 wifi not connecting - Huawei Cell Phones

May need to change sim card or get sim reader replaced

Unlocked cell phones will not work with CDMA Carriers like Sprint, Verizon, Boost or Virgin.

call service provider

This can happen for a number of reasons. You could have a virus on the device, the operating system could be crashed, there could be a hardware glitch.

I would start with attempting to boot the phone into recovery mode. You can follow the steps attached to do so. Once you get into recovery mode, try to select the option that says "Clean System Cache" and then reboot the phone.

If upon reboot it still gets stuck at the screen, boot back into recovery mode and do a factory wipe.
http://www.hard-reset.com/huawei-ascend-y530-hard-reset.html

I’m happy to assist further over the phone at https://www.6ya.com/expert/christopher_d13aca62d29ed9ae

Try this instead:
connect your phone to the computer with the given USB cable.
Open my computer and look for your phone. It should be listed. double click to open and look for DCIM folder and the pictures in that folder. If you find that, just copy and paste in the folder of your choice.
you can also connect the phone with the cable and a window should pop up asking what do you want to do. Click on import pictures and the rest is as per instruction on the screen.
Hope it helps Huawei Ascend Y530 setup and user guide

What's your Huawei phone model?
you can get the unlock code for your Huawei phone from Unlocking4U.com and unlock your phone from Network lock easily.

Hi
First, make sure your WiFi is turned by going to settings> Wireless & Networks" If it is on then you will see a list of networks within range, each of which you can tap on to connect to it.
To connect to a WiFi network, you may need 3 pieces of information:
A username
A password
An encryption key
Once you have successfully linked to a WiFi access point then your phone will remember the settings until told to forget them.
A lot of the time you may only need the encryption key, and if the tablet detects a WiFi access point then if you tap on that in wireless settings then it will either connect automatically or ask you for some sort of code - the encryption key. If this is not entered correctly then it will return an authentication problem/error. In order to connect you have to have this code.
Cheers

There's and app for that