Set clock how do i set my clock on my alpine stereo? CD receiver CDE9845

1. In the Clock priority mode, press and holdTITLE for at least 2 seconds while the time is displayed.The time indication will blink.
2. Turn the Rotary encoder CDE-9846 only) or press "up" and "down" (CDE-9842 only) to adjust the hours while the time indication is blinking.
3. When the hour has been adjusted, press the Rotary encoder (CDE-9846 only) or press MODE (CDE-9842 only).
4. Turn the Rotary encoder (CDE-9846 only) or press "up" and "down" (CDE-9842 only) to adjust the minutes while the time indication is blinking.
5. The time is automatically set 5 seconds after the minute adjustment.
6. The time can also be manually set by pressing the Rotary encoder (CDE-9846 only) or press MODE (CDE-9842 only).

Download Alpine CDE 9842 Manual

Follow the instructions on page 15 of the manual.

press and hold clk button for 3 seconds till it flashes then press the h for hours to set and the m for min to set after you set the lat setting it will auto save the time.

Here is a link to the owner's manual for your stereo, it will show you how to do it:
http://a248.e.akamai.net/pix.crutchfield.com/Manuals/500/500CDA9884.PDF

Hi there,

From Page 6 of the CDM-9801 manual from Alpine's site:

http://vault.alpine-usa.com/products/documents/OM%20CDM-9801.PDF

------------------------------------------------
1. In the Clock priority mode, press and hold the
DISP button for at least 3 seconds while the
time is displayed. The time indication will blink

2. Turn the Rotary encoder to adjust the hours
while the time indication is blinking.

3. When the hour has been adjusted, press the
Rotary encoder.

4. Turn the Rotary encoder to adjust the minutes
while the time indication is blinking. The time is
automatically set 5 seconds after the minute
adjustment. The time can also be manually set by
pressing the Rotary encoder.

--------------------------

I hope that helps.

how to reset clock on cda oven?

Turn the stereo off before you stop car. If clock is not displayed press display until clock is displayed. Then turn off car, and turn it back on it should have clock up.

set clock on my alpine CDE-9874
CD reciever

hold down display button until time is blinking, about 20 - 30 seconds. to change hour press 5 button, to change minutes press 6 button. get time set then press display button again.

Hold in title button on the bottom right hand corner