Fujitsu Laptop C Series Lifebook Display problem? hi i have a Fujitsu Laptop C Series Lifebook laptop.recently when black scree become maximum then give vartically ray in the display.if i play the med

I'm a bit confused by your terminology, "snooze" function? We are talking about a Fujitsu Siemens LifeBook A Series Laptop, Correct? If your referring to the Sleep or Hibernate settings, Open the Control Panel, select Power Options, you didn't post your OS, so here's a Win 7 solution, set to High Performance, select Change Plan settings, under Plugged in, set Display time and set Sleep to Never, select Change Advanced power settings, go through the settings one by one set to your preference. Sleep and Hibernate to Never.

if you have the recovery partition on the hard drive you should be able to access it by pressing F9 continuously when you start the laptop.

Best an easiest option is eBay.

http://www.ebay.co.uk/itm/Keyboard-French-Fujitsu-E8110-S7110-CP275819-CP297220-/110559275730?pt=PCA_Mice_Trackballs&hash=item19bdd8aad2

How to Replace a Fujitsu LifeBook S2210 Fan
1. Follow your laptop owner's manual and assembly guide carefully as you disassemble the laptop. Touch something metal periodically to remove static charge, and work on a large table with a bright light source.
2. Turn off the laptop and unplug it. Remove the main battery, DVD drive , Ac adapter and the hard drive. The hard drive is usually located in a slot on one side of the laptop. Remove the screw that holds the cover in place, then pull out the hard drive, screen sled.
3. Turn the laptop over and remove the screws on the bottom that hold the keyboard in place. Flip the laptop over, open it, then lift the keyboard up and out. Unplug the flexible ribbon cable that connects the keyboard to the motherboard.
4. Remove the screws that hold the laptop keyboard bezel and palm rest in place. Carefully pry loose any plastic snaps on the sides, then lift the bezel and palm rest up and out.
5. Unplug the Fujitsu LifeBook S2210 CPU Cooling Fan. Remove the screws that hold the heat sink and fan in place, then remove the entire unit from the laptop. Remove any thermal compound residue from the bottom of the heat sink and the CPU.
6. Apply a thin layer of thermal compound on the CPU, then replace the heat sink and cpu cooling fan. Replace the screws, plug the Fujitsu LifeBook S2210 Fan back in, then reassemble the laptop.
7. Plug the laptop in and turn it on. After you use it for a few minutes, you should hear the new Fujitsu cpu cooling fan running and feel warm air blowing from the vent on the side of the laptop. A Fujitsu LifeBook S2210 Fan does not run continuously, so don't be concerned if the Fujitsu LifeBook S2210 Fan shuts off periodically.

Hi

After connecting the projector ( or any other external display ), you need to tell the laptop to toggle the display to the external one, not the laptop screen.
To do that, you can press the ( Fn key + F7 ).
Some times, it's F4, regarding the laptop.

F-key have icon like monitor on it.

Please, Tell us your results.
Good Luck

change the ram memory ...this issues appear when the ram memory is not functional like it should..if you have a way to borrow some just to try ..you will make an ideea
If you have more than one boards in the laptop..remove one by one ..and try to boot with the other/s until you locate the one with problem..

Most likely a hardware issue already as how you described it. So your fan is not working? Your system is heating up already. It might also have gotten some damage on the video as well. You have to get someone check the hardware locallly.

the internal bulbs of ur monitor screen have deteriorated...the manufacturers are real smart, these monitors dont last forever. So if repair estimate is too expensive then replace the whole unit.

Always purchase laptop or notebooks NEW or never more than 5 years old.

hey your all usb ports are not working or a single port thats giving the problem

Over heating. Try clean the air flow. External and internal closed the heatsink.