My iPrc webcam no driver china made model no.801M resolution 800x600

1st You download Webcam Driver.
driver to my pc cam After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.
Ezonics Camera Drivers for Windows XP Vista Windows 7

Hi,
I couldn't figured out the exact product type you provided but there are similar drivers below on the link i have provided, check it out. and let me know if it helps.

http://support.creative.com/Products/ProductDetails.aspx?catID=218&CatName=Web+Cameras&subCatID=231&subCatName=MIDI+Keyboards&prodID=17865&prodName=Live!+Cam+Chat&bTopTwenty=1&VARSET=prodfaq:PRODFAQ_17865,VARSET=CategoryID:218


http://support.creative.com/Products/Products.aspx?catid=218

Take care.

www.logitech.com/support-downloads

Hi,
Try the driver at the following link:

http://www.logitech.com/index.cfm/480/3406&hub=1&cl=za,en?section=downloads&bit=&osid=1

I'm quite sure the driver will work for all Quickcam Express webcams if the one at the above link is not your exact model.

Best wishes,
Graemevm

PC camera china made,CMOS image sensor USB type,hi-resolution:640*480.24bit RGBS/N RATIO 48dB
frame rate 302*240 up to 30 frame/sec/(
cif)
i have problem in which whenever, i conect with yahoo massenger and on cam, no pic on frame and conectivity,but when i give vedio call a small pic come on frame(ony pic come when give vedio call)

Plug it into Windows 7 and it will tell you that the driver is:
vmicro usb pc camera (VC0303).

search for that driver on the web.

It would be cheaper to buy a new webcam than purchase the software just to find out the model number and required driver.

Check www.driverguide.com and see if the china made camera driver is there. this is a huge data base of drivers and I am sure they have it. thanks please rate me...

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Try http://www.uptec.com.hk/download.htm

Keith

I've got a webcam, all over branded as A4TECH "PK-30MJ"
but listed as "Vega USB 2.0 Camera" in the devices

http://a4tech.com/ennew/driver/CameraJ.zip recommended as optional drivers to use interpolated @800x600 video, doesn't