Gigabyte GA-7IXE4 (GA-71XE4) Motherboard Logo

Related Topics:

A
Anonymous Posted on Jul 09, 2013

Manual Pic of power leds hook up.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Need to hook power button and led lights back on board

See the mother board layout below.You just need to hook the cables to the points mentioned in the pic.

vahiddhm_1.jpg
0helpful
1answer

BLINKING LED LIGHT WITH NO PICTURE . I WAS HOOKING UP RCAS ON THE BACK AND POOF NO MORE PIC

power board is dead,must replaced the power board to get power back.Tries Shopjimmy.com,Ebay.com for the power board part.
1helpful
2answers

Dont know where to hook up the power and leads on the p4m80 -m4 to get power

missed placed the manual of the m935dlu motherboard having problem hooking up the panel switches the led sw, hhd sw, reset sw, suspd led and pwr sw
0helpful
1answer

Power on but no pic or sound just the power LED blicking green

I replaced the flyback transformer and horizontal output transistor and works great.
0helpful
1answer

My A8N-SLI Premium

Hi big_cool, do you still have you're manual for the A8N-SLI board? Go to page 2-29. The ground is clearly marked in the manual. Wire colors are different from case to case. Black & white are commonly known as ground. Every case connector will have one wire color in common. The common wire will be positive +. The speaker connector uses to wires in a four pin connector. Red is positive & black is ground.
This pic (below), has been blown up to help you see. EX: The hard drive LED + sits on far left edge. Bottom row. The ground is the next pin to its right. Up on the top row. Left edge pin is the positive pin for the PLED = Power LED. Skip one pin to the right & the next pin, (Third from the left) is the ground for PLED.
1d367be.jpg This should help you get the rest of you're case LEDs connected.

Good Luck!
Have more questions? Please feel free to ask.
Mike
0helpful
1answer

D815 led and etc pins

Looking at page 85 in you're user manual. The 15 pin jumper block. Starting at Pin 1 (Hard drive LED) is positive + & pin 3 is ground -. Next, Power LED, Pin 2 is + & pin 4 is ground - .
Letter C, is for the reset switch, Pin 5 is + & pin 7 is - .
Power on/off switch, pin 6 is + & pin 8 is - .
The letter I is used for the internal speaker. The positive pin number 16 & ground pin number 10, letter G. If you need the manual you can download it from this link.
ftp://download.intel.com/support/motherboards/desktop/D815EEA2/EA2FV_English.pdf
Included below is a small pic.
e8e7d5a.jpg Good Luck!
Have more questions? Please feel free to ask.

Mike


Not finding what you are looking for?

61 views

Ask a Question

Usually answered in minutes!

Top Gigabyte Computers & Internet Experts

MegaByteMe
MegaByteMe

Level 2 Expert

143 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Are you a Gigabyte Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...