I have an Insight Technology Mini Thermal Monoculars w/ Laser Devices MTM, recently i changed the batteries (DL 123) but now the screen does not stop flickering/flashing. Please advise

Could be a battery problem. Some devices have a reset. Try the support link on the following page: Rii - Mini Keyboard,Wireless Keyboard,Bluetooth Keyboard,Remote control,Mouse (riitek.com)

I can't find the manual for this model. The only user manual I turn up is for a combo unit: https://minitoetsenbord.nl/wp-content/uploads/2016/11/Rii-Mini-X1-toetsenbord-RII-MWK01-handleiding.pdf

To change the battery on your Night Owl Explorer NOCX3 monocular, you will need to follow these steps:

1. Unscrew the battery compartment cover located at the bottom of the monocular 1.
2. Remove the old battery from the compartment 1.
3. Insert a new 3-volt lithium battery (123 type), which is also known as the CR 123A, EL 123AP or DL 123A 1.
4. Screw the battery compartment cover back into place 1.

Please note that some models of Night Owl Explorer use 2 standard AA batteries instead of a 3-volt lithium battery 1.
I hope this helps you change the battery on your Night Owl Explorer NOCX3 monocular! Let me know if you have any other questions.

Please always refer to the user manual.
Night Owl NOCX3 Manuals and User Guides, Monocular Manuals - All-Guides.com (all-guidesbox.com)

Not all new equipment is backward compatible to older technology. In some cases, the fittings are different, the voltage input and outputs are different, and thus you cannot use older technology with new devices.

I gather that you have checked the bulb with a meter to see if it is bad. If it is xenon high intensity then they have a short lifespan because of the heat. If that is not the problem check the batteries with a meter to see if they are good and if they are, replace the switch.

how are

Hello, most of these NV monoculars uses CR123A. It a 3 volt battery about 1/2 size of AA and its girth is a little larger. Aslo, some use two AA batteries. Little information here. Some of these night visison monoculars and binoculars that sealed for water infiltration are epoxy together. stewbison

I would first check what city or town your looking in....

go to Where To..... Address....on the addres screen does it say Select City in ( city the address is in ) ?

If not on bottom of screen it will have change State / Province


If you want you can send me the address or street name and i will check to see if the same happens here....

sometimes if you enter 123 N West St you will need to put 123 North West St or 123 St Anne would be

123 Saint Anne

Here's a link to the manual. All the details you could ever need.

http://www.marriage-4u.com/files/notebooks/ex_4620_4620z_4220_user_guide_eng.pdf

Hey,
Goto device manager by right-clicking My Computer-> properties-> hardware-> device manager.
There in mice and other pointing devices category, select your mouse, uninstall it and refresh the page. 
It should automatically detect your mouse.
Thanks

use dvi or hdmi.