...clock. If the timer controls the sprinkler or lights, then the clock motor is probably 120V, with 120V clock motor Grainger sells 120 and 240 clocks for the T100 series timer ...
...clock/timer button for 3 seconds (clock icon will appear on left side of screen). Input time using keypad then quickly press clock/timer button to save. To set timer: Press and release clock/timer ...
Question about Intermatic Hardware & Accessories
...Clock motor replacement takes a small star-screwdriver bit http://www.grainger.com/Grainger/timer-accessories/timers/electrical/ecatalog/N-8hi If your manual override is not working, then the gears ...
...timer dial. To set clock, manually rotate timer dial clockwise until current time lines up with arrowhead http://waterheatertimer.org/Intermatic-timers-and-manuals.html#KM ...
Question about Intermatic Hardware & Accessories
...timer mechanism or clock motor Things to check: 1) Is yellow dial rotating? If not, then clock motor is probably bad. T-100 240V time clock motor sells for $16 at grainger. Also timer may not be ...
Question about Intermatic Hardware & Accessories
...timer to work. You can replace the clock motor Take mechanism out as described above, clock motor is located on back and has identifying markings Order a new clock motor of same type: ...
Question about RTO Hardware & Accessories
...timer, it takes 125V clock motor. http://www.grainger.com/Grainger/INTERMATIC-Time-Clock-Motor-1PNK1?Pid=search B) This is new installation? and clock motor only worked when override was ON, so you ...
...clock and timer on a 102E5 The clock setting is wrong which means I cannot use the timer for the boiler. I need help to reset the clock to enable the use of the timer. RTM. Read the Manual. You can ...
...clock matches W100 timer. If dial rotates but trippers do not turn Load on-off then buy P-69 trippers If manual override turns Loan on-off then electric circuit is working If manual override does not ...
...clock/timer button for 3 seconds (clock icon will appear on left side of screen). Input time using keypad then quickly press clock/timer button to save. To set timer: Press and release clock/timer ...
23 questions posted
Usually answered in minutes!
4 Questions
3 Questions