Question about Garden
...mower) and that is the highest setting which is about 4" cut height. Each number for the lever position represents the inches in cut. In between numbers is 1/2" so in between 2 and 3 would be 2 1/2" ...
...mower model no. 917.270812? I turn the adjustment knob and it will lock in only on the highest and lowest heights and nowhere in between. You need to turn that knob to its highest point with the deck ...
mower model number 405000x8c. bad fuel filter, maybe cutting to fast, or grass is to high for what ever setting your at. example. if grass is more then 10'' high, its not recommended to try and cut it
...riding mower deck cuts too low when set in the in the highest position. You will have to find another way to highten the deck, different bolts, shorter springs, Or if possible, adjusting the ...
...highest setting, it still cuts too low. can i adjust it to cut higher? When you put it in the highest setting can you see the deck actually moving in an upward direction? If not the linkage might be ...
...mower...I lower the carriage to mow...and even on the highest setting it practically scalps my lawn. I've hit dirt even with the blades. I don't see a height adjustment on it other than letting the ...
...highest setting, but as soon as I lower the deck the engine cuts out. Why is this? It sounds like when the unit is under more load it stalls out. It could be that bearings on mower need to be greased ...
...highest setting (5) aswell as the front side wants to stay lower to the back side of the cutting deck. How do i fix this so it is completely even. This all happens when it is on a complete flat ...
...highest setting, I still cut the grass to short The deck may be installed in the incorrect position on your tractor (if this is a tractor). If you have the owner's manual, check the information ...
2,432 questions posted
Usually answered in minutes!
1,006 Questions
710 Questions
725 Questions
285 Questions
244 Questions