...circular saw since new (the 80's). There is not a spindle lock. The bolt turns clock-wise to tighten. I usually hold the blade with a gloved hand and snug up the bolt. It will tighten when in use. ...
...tighten the hex nut with the lever until it holds in place and reassemble in the reverse order. Also you might want to check the carriage bolt to ensure not rounded or the shoe bracket is not spread ...
...right or left? Hi, You need to turn the bolt anti-clockwise to undo and clockwise to tighten back up. Make sure you take out the battery and press in the spindle lock before you change the
circular saw.??? First remove the battery, next make sure of the blade rotation and remove the hex bolt and OUTER flange lift the guard and put the blade on the spindle. Reinstall the outer flange and
circular saw model #73125 and the blade is loose, when i try to tighten the center bolt the moter spins i need to know how to lock the moter so i can tighten the blade The threads of the bolt or shaft
...blade, put it on the saw, then open the guard and rest the blade on a piece of scrap wood to stop if from moving. Then fully tighten down the bolt that holds the blade in place and you should be
...tighten the bolt So your saying you tried holding in the lock button but its not working well enough to stop the blade ?? You can be careful and under the guide plate lock on visegrips wrench to the ...
81 questions posted
Usually answered in minutes!
29 Questions
18 Questions
15 Questions
7 Questions