Arrow Fastener T27 Light Duty Household Staple Gun Tacker "took staple gun apart" Questions

...wont sink a 2 inch staple more than 1/4 inch deep. Fires week but retracts piston strong. 100 psi air pressure did you look for a clog in the air passage inside the gun when you took it

...took my stanley heavy duty staple gun apart because something came loose and was clickin when i moved gun up and down so i took it apart to see what the problem was,but as i opened the casing ...

staple but be careful how every thing comes apart it will not work if shims and washers are not replaced right i took the front off to unjam mine and i pulled the spring out, no clue where to reattach

put the inside back together call Arrow and claim defective product or buy a new one. Once you mess with the insides you need to remember the order you took the pieces apart.

Mintcraft staple gun. I took it apart to clean it but can't get it reassembled. Cant help

...TOOK APART THE STAPLER BECAUSE IT WAS JAMMED NOW I CAN'T FIGURE IT OUT TO PUT IT BACK TOGETHER Should slifde right together from the back. If you will go to the company web site, there is an exploded ...

...a MIIIFS that will not push staples out! what is the deal? I took it apart it all seems fine . Can you help me make sure there is no staple stuck at front,also insure your spring is though

...staple gun back together... I took out the screws and the whole thing came apart, before I could look at it. I have know idea where all the pieces go back at. Is the a diagram that I could llok at to ...

...staple gun..I need the exploded view of this product.Help!! I dropped my Powershot in a lake, took it apart to clean and dry, now can't reassemble. I need directions. Thanks. Check this link here it ...