McCulloch 16 In 4.5 Hp Electric Chainsaw With Carrying Case MCC4516FK "remove chain saw link" Questions

...chain to remove however many links you need then install the connecting link. If you're not sure how many to remove, take out one at a time putting the connecting link in without bradding the rivets. ...

...a decent link. Some saws will give trouble if the brake is on when you remove the side cover so make sure the chain moves freely before removing the side cover. Here's one on tensioning the

...chain to ride up and off the bar when operated. Use a file on the drive link flats to remove all burrs. An Operator Manual far almost all models of RemingtonPower chainsaws can be found here: ...

the chain to stick and not run freely. Once you've identified the problem links you can remove the nicks using 120 grit paper backed up with a flat piece of steel so you only remove the high spots

...chain saw throws chain off I cannot get the slack out.there are 2 nuts only 1 nut grips the blade when I put the chain on If a new chain :: make and model is important here, as are guide bar length a ...

remove bar and chain from saw and spray both several times with WD-40 and work chain link by link until they all move freely.Clean and lube guide channel on bar and make sure that bar is not dented or

saw will not cut , chain stops turning when chain touches wood husqvarna 340 , chain is tight and sounds and works great until u apply it to a tree. then chain stops ( won't cut ) and sounds like ...

...loosen the one or two nuts that hold the bar tight and loosen the screw that you use to adjust the chain tension then remove the nut or nuts and the bar, then the chain. put it back in reverse

chain for the saw...reason i ask about the chain comming off the saw is that when it does the driver have a tendency to become nicked and will heat up the clutch because the saw is trying to drive the

...chain will easily remove from the guide bar with all that slack in it. Note the orientation of the cutting edges of the chain so you put the new one on the same way. Pull the drive links out of the ...