...bent. replace the bar - evidently one side of the bar is worn more that the other part of the rail. the chain twists and runs crooked onthe bar. As the chain wears the bar, a wire edge is created. ...
...fix the issue remove the clutch by pulling the c-clip and retaining washer. I would look at the bar and chain and make sure they are not bent or damaged. ask a local dealer like www.arcolawn.com for ...
...fix it. With the saw not running (and wearing a glove) try pulling the on the chain towards the end of the bar. If it feels rough then either the chain or the bar may be damaged. Try taking the chain ...
...fix, because there is a spring mechanism inside the trigger handle, and the linkage is a strong bent metal bar that winds its way into the motor and fits into a hole in the throttle assembly, but is ...
...fix this issue w/o taking it to repair shop. Thanks in advance. The bar groove has a hidden slot place close to one of the 2 bolts that hold the bar where the bottom of the chain groove is connected ...
fix the kill switch yourself. otherwise you can use the choke as described, it won't hurt anything on your saw, I have a Stihl 011 with a bad kill switch that I've been using for years. Yes Scott, but
...fix it, as I am skilled in small engines, but have never actually taken a chainsaw apart. I dug into it and found that the fuel line that comes out of the side of the carburater and leads into the ...
bent, and not just the peg, please consider taking the saw to a professional. A chainsaw is not something you ever want to operate with damaged parts. Terrifying injury or ***** are real possibilities
215 questions posted
Usually answered in minutes!
311 Questions
93 Questions
31 Questions
30 Questions