Pride Jazzy 1103 Ultra Standard Power Chair  "joystick sticks" Questions

start button within 10 sec. push the horn button twice. This should do it, but if it is a different Joystick then try, push the button to start then hold the Joystick forward until it beeps, then hold

joystick from the power, the light either does not stay on or the stick does not operate independantly of the power source, then the internal battery is defective, has exceeded the number of recharges

I let my pronto m41 joystick fall against my desk and the joystick lights came on brefly and the the SPJ+ light came on and then went off and now the joystick does not work. SPJ light came on and now ...

...stick does not work The M51 could have the motor clutch levers in the free wheel/push mode and the joystick will not blink if this is the case. Make sure that the chair cannot be pushed. If it can

i have an arrow storm ,,,replaced motors with 4 pole motors , stronger, as well as a joystick , now it runs a few days and kills the joystick UpGrading the Motors is your problem, they are stronger ...

...will it damage it? I guess it depends on hw wet. Yes water can damage your chair especially the joystick. It can cause the circuit board in the joystick to short out. If the chair's motors get ...

A lot of play in joystick, Of my Pronto M51 powerchair Yep when I go to control the directions the joystick has about, I don`t know so much play can`t control it. your joystick needs reprogramming or ...

...the ON/OFF button. After one second the controller will beep. Release the ON/OFF button. Move the joystick forward until the control beeps. Move the joystick in reverse until the control beeps. ...

...the lite diplay shows 7 lights the joy stick feels like it is out of the sosket If you have a vsi joystick seven bars means there is a possible joystick trip a joystick trip is indicated . Make

...the on/off key. After one (1) second, the VSI should beep. 2. Release the on/off key. 3. Push the joystick to the full forward position until the VSI beeps. 4. Pull the joystick to the full