Clarke Power Products Clarke 130EN Wirefeed Welder - 110 Volts, 130 Amps, Model# WE6523 "welding co2" Questions

...CO2 mixture without any problems, the main thing about welding is cleanliness, what your welding always welds better if it is clean. hope this helps. argon for mild steel with solid welding wire or/ ...

...argon/CO2 for mild steel welding, argon 100% for aluminum and trimix helium/argon/CO2 for stainless steel. Also check your heat (voltage) 16-22 is enough for weld of most steels less than 1/2

...CO2. Aluminum Welding requires pure argon. Any use of gas requires a steady gas flow of no more than 25 SCFH. If you use more than that or less you will find porosity on the welding. 3) Your work ...

...welding with fluxcore wire in my hobart 140, do I have to buy another mig gun to weld solid wire and using argon/co2 gas mixture? you need ar/co2 95 5 change contact tip to what ever size wire you r ...

...welding different gas mixes will give different amounts of spatter, pure co2 doesnt spatter too bad, flux core spatters like crazy, and 75/25 has light spatter also If wire feed is to fast the wire ...

WELDING WITH A MIG AND HAVE NEVER SEEN THIS PROBLEM BEFORE Newer welders as hobart and miller are set up from factory to use innershield wire therefore polarity is set up as inverse. Check inside your

need to weld alum ,have co2,have er5356,need wire speed ,heat hi-low/ 1-2 setting info You will never weld aluminum with CO2, you need straight pure argon. The best aluminum wire for starters is ...

...co2 gas and with the welder turn up as high as it goes the weld just beads up without any penetration and I was only welding 14 ga material. That doesn't sound right. Double check your ground and the ...

I have a clarke 100E MK2 gas mig. Will I get a better weld by using a flux core wire in conjuntion with the gas or is this just overkill? Hi: It's redundant if the wire is fluxcore, gas does not ...

...Co2 gas! Is it better to use the gas and what does it help? My other question is I can not get any weld to stick! I read the Owners Manual and the trouble shooting section and nothing seems to be ...