old Miller Bobcat 225. Also what gun do you recommend? If your Hobart Mig is less than 250 amps then yes you can, bobcat 225 will give you10000 watts and you require at least 8000 watts for the hobart
...hobart ironman 250 Wire speed 0=150"/min,10=162"min,20=192"/min,30=232"/min Do I need a new reostat? I have cleaned the contacts on the voltage switch to find out if you need a new reostat disconnect ...
...250 class mig welder to buy the miller matic 252 or the lincoln 255 xt? I was warrenty repair shop for lincoln, esab ,miller, hobart,and clark for five years .my expereance with lincoln as far as ...
...250. arc not steady unstable arc.arc not steady..has variations in amperage..lines to shop checked. power to machine oK..everything checks out...old Hobart will outweld it hands down.. Your windings ...
I have a IRON MAN 250 Mig Welder. that the wire don't feed, with regularty. I have a miller with the same tourch that dose the same thing. If you pull about 4 or 5 inches of wire out, with trigger
Question about Miller Welding Tools
...hobart and others tell us that could be from lincoln, miller and others brands, we dont have any information, the transformer only have a plastic that says the number of transformer but its not a ...
hobart handler 135 is not working the fan comes on and it makes a clicking sound when i press the wand but nothing els happens, i put power to the drive moter and it spins. Check the 24 volt contactor
...250 welder torch tip Do you know if any size will fit the machine and also where can I find it in South Australia? Thanks its a Hobart copy. Use tips intended for a Hobart, and always be sure to use ...
6 questions posted
Usually answered in minutes!
111 Questions
70 Questions
52 Questions
49 Questions