Poulan 25cc 2-Cycle Gas Powered String Trimmer with Curved Shaft #P1500 "weed eater idles dies" Questions

weed eater runs at idle but when i go past fast idle it wants to die. i put a new spark plug in it, it didn't change. what could be the problem? it started doing it last fall. Sounds like fuel problem

my weed eater will not run more than 30 seconds before it dies. Once it starts to idle it dies rebuild carb that will fix your problem

...of the bulb to get it to start. the Carb is WT2682A-19 on a BL150 Bolen Weed Eater You need to readjust your idle/full speed jets... Sounds like the high speed jet is set too low readjust while ...

Weed Eater Problems I have a TroyBilt model TB25CS weed eater that was running perfectly until a couple of weeks ago. I believe it has a ZAMA carburetor. It starts but when I just touch the throttle, ...

...weed eater, when you release the throttle the engine dies If you still have your instruction book look for for the location of the idle adjustment screw. If you find that and adjusting does not help. ...

...weed-eater. It recently developed a miss and will not stay running at idle. If I keep it accelerated it will stay running; when I let it idle it will die. I have replaced spark plug, gas filter, and ...

what would be wrong with my trimmer if it idles good but wants to die when i try to accelerate It either needs the L mixture screw adjusted (counterclockwise 1/8 to 1/4 of a turn) or the metering ...

feather lite trimmer only runs on half throttle and idle dies on full throttle. unit is new When I bought a new poulan gas trimmer, I had the same problem. Solution was to return it and get another ...

...weed eater, model number RY30240, to overhaul? The weed eater starts find, but when you give it gas it bogs down and dies. No matter if you give gas slow or fast it dies. There is no problem starting ...

...weed eater, it will run in idle, but as soon as i hit the swith it dies try ajusting carb did get better.if no rebuild carb and ajust carb again should fix your problem low needle 1 turn out and high ...