Craftsman 25cc Gas Line Trimmer "screws" Questions

IDENTIFY CARB SCREWS There are two adjustment screws side by side and the phillips screw idel adjustment.. Identify the function of the two side by side screws. The the two screws arew fuel screws so ...

TUNING THE CARBURETTER HAVING TROUBLE WITH THE MIXTURE SCREWS Start with the L or low speed screw at one turn and the H or high speed screw at two turns. To get good responce from idle play with the ...

WEED TRIMMER CARBURETTOR ADJUSTMENT carburetor adjustment Three screws. On some, there are only two screws. Some have only one screw. A few have none at all. If there are any screws, one is nearly ...

i have to hand choke it in order to keep it running there are adjusting screws on the carburetor they will be screws with a spring on it ... try slightly adjusting them ... if your choking it then ...

how many turns out on aiir screw Hi. Normally to set any air screw, you will have to screw it in completely, and then start unscrewing it, counting the number of turns. To set, screw it back in, half ...

tk carb ? sthil trimmer has 3 adj screws ,how do you adj? One adjustment screw (probably Phillips-head) is the Idle speed adjustment screw. Turn it in, to increase idle speed (it moves the throttle ...

need carb settings on both screws on Ryobi C430 start with both screws about 1 and a half turns out from fully screwed in. The high screw will set your fuel for wide open. Back it out until you hear ...

Carb Adjustment on Stihl FS %%T LA Screw Son messed with Adjustment screws and do not have the adjustment spec. for the screw labled LA Turn both screws clockwise, until they snug down. then turn them

mixture screw problem i have a ryobi rlh1100a lawn hornet and i wanted to know what both mixture screws had to be adjusted to. thanks you can start them at 1 & 1/2 and go from there This is ...

91 jag xj6 setting idle mixture fuel mixture idles to rich screw both screws in until they just come to a stop. One screw should have the letter H and the other screw should have the letter L stamped ...