Yard Machines 158cc Push Lawn Mower #11a 034f200 "bubble" Questions

...model #917.377292 won't stay running Lawnmower will start when I press the cold start choke bubble several times but then dies right away. This was done repeatedly and still no different. The ...

...although a different type of mower. if the machine is a few years old, quite possibly the primer bubble/ball is cracked from age and is sucking air instead of fuel. They are easy to replace. If ...

primer bubble will not return out after running for a while (engine also starts hunting) Have changed carb. diaphram ,and cleaned card. check the vent on the gas cap

loss of power, smoking, and the oil is clean but has bubbles in it this could be bad, but this is a good sign that the rings are bad or a scored cylinder. might have to be rebuilt or think about ...

starts just fine but then dies right away Most likely Water in your fuel tank ... Look in the gas tank w a flashlight and water will sit at the bottom. looks like bubbles ! If so dump the fuel tank ...

...ideas? I would check the fluid levels for the pumps on your wheels. It may also have worked an air bubble in there or it may need

.sounds hesitant and then eventually stops...filter is clean and clear...oil OK...could it be a air bubble in the gas line? If so, how do I fix that? Thanks sounds like you sucked in some garbage from

...and air, not fuel is being sucked in to the primer, check the fuel line and primer pump gaskets or bubble (if it is the primer bubble

how much pag oil and Freon will I need to replace the ac compressor on a 648g3 john deere skidder There should b a little glass bubble..to see. How full.

...every 5 feet or so. Its about 4 years old. Any suggestions? Its a pull start. You have to push the "bubble thing" 10 times at first before pulling. But it dies after 5 ft. It won't start again if I ...