Craftsman 4 Cycle Blower/Vac "hose" Questions

...diagram I need to find part numbers for a Stihl BR600-Z Blower. Specifically the inner and outer Hose clamps for the flexible hose to hard hose nozzle had same model, I took my hose (piece) and

...gas lines were reversed by the factory and it worked just fine for about 5 years. Then the shorter hose got a crack and I couldn't get it running well at high speed and after a few minutes died ...

...order that from parts suppliers. Hardware stores will not have it. There is a fitting with a hose barb on it that fits through the tank. On the outside of the tank on the bottom there will be

take apart stihl blower for repair If you have the correct Stihl hose , then pull air box off and will probably have to remove the 8mm nuts that hold carb on and disconnect the fuel line and  ...

how to replace fuel lines i take the new piece of hose cut it down to 1'3 its size about 1/2 long then feed a stiff wire threw the hole and out threw the cap opening slide the hose over the wire ...

i have two black hoses that look like they go to the gas tank one broke off and the other has a plastic nozzle on it and there is two holes in the bottom of gas tank is that where they are to go. Yes,

...throug to engine While accessing the inside of the tank thru the fuel cap hole,try attaching the hose to the filter and place it in the tank, then use a coat hanger bent enough to allow you to

...plastic tubing -- where are these routed? The order of fuel travel should be: Fuel filter to fuel hose to Carb's Fuel Supply nipple. (On the main body of the carb) Primer Plate Nipple on carb to ...

...the lines onto the connectors, the posts went into the fuel tank. How does one reinsert into those small openings??? I slice the new hose like the end of a medical needle, like a long v. A ...

need to pull the full tank off a GMC 26cc petrol blower and replace fuel hoses. need a repair manual fuel hose has perished and need to replace it there are no machinics in my area which can do the ...