...lawn mower when brake is released engine dies. When blades are engaged engine dies. Is there a deck switch on this model and where is it located? Hi..my name is Keith...and i havent worked on that ...
Question about John Deere Garden
...lawn mower ran out of gas and won't crank back. Noticed the parking brake is engaged but will still roll. What is my problem? Hi Shannon, It's either fuel OR electrical, First check electrics, If it ...
Question about Garden
...mower. in order to start working on it. it will help so much. Rose, go to you tube and watch some videos on (replacing lawn mower brakes). this should give you a start. not all mowers are the
brakes wont release on riding lawn mower alittle PB Blaster helps alot spray brake and springon rearend an just work back an forth should break loose have to do this all the time on cubs
Question about Craftsman Garden
...lawn mower starts but will not go forward or backward? Make sure your bypass lever in the back is released. if it is, pull it out (engage) and release it a couple of times. If that doesnt work, try ...
...is not working. This switch must be made by a person sitting in the seat for the brake to be released or for the blades to be engaged. It is possible to start the mower with the switch open. ...
Question about Craftsman Garden
...lawn mower LT2000 (2002/2003) stopped moving. The drive belt seems to be loose. The engine starts and cutting blade engages fine. Was working fine but stopped working when it started sliding back ...
mower dies after disengage brake Sounds like your switch that senses when your sitting down is not working. If you get up off your seat while the tractor is running and the brake is disengaged, the ...
...mower started fine and brakes also worked fine until, while riding it brakes stopped working and next time I tried to start it it wouldn't start I assume the problems are related as opposed to ...
295 questions posted
Usually answered in minutes!
1,998 Questions
1,006 Questions
710 Questions
725 Questions
285 Questions