...out and stretched, but first check that the idler pulley is in place (pressing on the belt to tension it) and that the spring (one or two) that tensions the idler pulley has not come loose or
...idler pulley belt was too loose and the guide was slipping and chewing the belt. I have tightened this but it appears to be still chewing the belt. Is the idler pulley wheel supposed to turn or the ...
...loose The drive belt goes around the transmission pulley (located under the cooling fan) then attaches to the engine. You will then need to loop the around the idler set. You will find a "v" shaped ...
...idler arm, put the new belt on (it will be loose, not tight) then hook the spring back onto the idler by pulling hard on the spring with a pair of visegrip or channellock pliers. Here's a parts ...
Question about John Deere Garden
idler pulleys are loose noisy or turn hard rough etc., then the electronic clutch for the P.T.O. is bad The mower has two clutches it has brake/ clutch and electric pto clutch for deck. It sounds like
...loose? Make sure the routing of the belt is correct, pay attention to tension pulley. Make sure belt is also not stretched you might need new belt. check your idler spring make sure its there and ...
Question about Poulan Garden
loose or one of the plastic flat idler pulleys has froze up and burned a hole through it then it could be making things skip. Again with the deck all the way down lock the brake. this will slacken the
...the belt being in it's most-loose position. You may need to wrap the new belt around the hydrostat pulley first, and assemble the last idler pulley and belt at the same time to complete the
loose when i lift it. Sounds like you PTO cable is broken. Part # 175067. It goes from the lever on the dash down to a deck mount and hooks to the idler pulley. When you lift the lever, it should pull
...loose. My deck blade will engage on their own after running for awhile. I could not see where PTO cable attaches to idler pulley on belts? Sounds like the belt is stretched or the tension spring has ...
229 questions posted
Usually answered in minutes!
68 Questions
23 Questions