Poulan Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin "oiler problems" Questions

Automatic oiler problem since date of purchase. Remedy? I've had to manually pour oil onto the chain to lubricate as the automatic oiler was not pumping the chain oil through to the blade assembly. If

...oiler problems on these saws. Sooner or later Husky will have to address it. Ask the dealer about modifying your oiler; the 350 has an adjustable and might fit 1 or both of these saws. I think Husky ...

...and it's not horribly expensive. Most good saws use a gear oiler - and even the newer Poulans use gear oilers. The gear oilers tend to have less problems and don't rely on engine

the automatic oiler on my sthil ms 390 is not working, the oil is running out of the front under the muffler instead of oiling the chain how do i fix this? If I had an IPL we would attempt a repair ...

...I would tell you that a dull chain is the number one cause of "oiler problems" because a dull chain will over heat and make it seem as if the chain has no oil. Good luck Joe vote this up if it

Pro 16-Inch 38 cc Anti-Vibration Chainsaw #PP3516AVX: Oiler doesn't seemed to work... Oiler doesn't seemed to work a common problem. Only way to fix is take it to a repair shop to have the oil pump ...

...hole if needed with fine wire or heavy nylon line. otherwise I think problem is interior, either oiler itself or oiler oil tube came loose. Since I have no excess oil coming out I suppose oiler ...

oiler problem on a hysqvarna 326P little or no oil coming out of the oiler Replace tank filter or adjust adjustment screw in bottom of the saw.

...oiler adjustment is aft of that and can only be seen from the bottom of the saw. The manual I saw said 3 position only with CCW (3 - 18 to 20" bar) most oil. Forcing it beyond the stops causes a lot ...

I have an MS660 and the bar oiler has not functioned on my last take of fuel. is there a way to trouble shoot the oiler problem without taking it into the shop. I hate to loose a weekend of cutting. ...