Poulan Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin "fix chainsaw stalling" Questions

Ad

chainsaw is brand new, but stalls when I make a cut requiring the saw to be turned on its side. My guess is that the fuel suction appears to be insufficient. Any ideas how to fix the problem? Rob Make

Ad

...fix. Look at the carburetor adjustment screws, look for the one that had the "H" . Should be on the right, the left is the low needle. Turn it to the right, snug, then back it out 1 turn. While the ...

Ad

...stalling in grass that should not slow it down I have A 6.5 hpcub cadet that out proforms this 10.5 hp You need to either shift the engine position or fix a weak idler pulley to tighten the V-belt. ...

...chainsaw runs fine until gas is pressed. When gas is pressed all the way, it dies instead of reving up to full throttle. Carb needs teardown and cleaning. May be a stuck float or clogged jet. ...

Question about Garden

1 Answer

...chainsaw that won't stay running. I have tried to adjust the H&L needles to the factory spec and it didn't work. The saw will run okay for about 15 seconds, then gas starts spraying out of the ...

...chainsaw that keeps stalling after successfully  starting.  just cuts out very soon after starting (5-15 seconds), even before cutting anything.  Goes from full running noise, then ...

what is carburetor setting on a2.3 chainsaw There is no fixed carburetor setting on these engines, just two screws to adjust low-end and high-end operation. Special tool may be required, there are ...

Question about Homelite Garden

1 Answer

...a homelite htc 12, Its starts fine but when I speed it up it stalls and wants to dye. how can i fix this ? Check tank filter first, should be easy to blow threw. Cut wire from clothes hanger, 8

engine stalls when choke is opened Dump out old fuel and start with fresh fuel. If no fix find and rotate your needle valves 1/4 turn each way and put them back exactly to the original position.

stalls with a load on it how to fix its probably carb. tuning issues. or low compression. clutch could be to tight. hard to say without knowing anything. About the saw or situation.

Not finding what you are looking for?
Poulan Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin Logo

546 questions posted

Ask a Question

Usually answered in minutes!

Top Poulan Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Poulan Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...