Poulan PP4218AV 18" Chain Saw "gas chainsaw full throttle" Questions

Ad

chainsaw dies out when gas is pressed to full throtle chainsaw runs fine until gas is pressed. When gas is pressed all the way, it dies instead of reving up to full throttle. Carb needs teardown and ...

Ad

chainsaw dies at full throttle, idles fine and works with half throttle hi check the fuel filter,clean the gas tank,the carburator ,check the fuel pump(not to be tired).the fine filter inside the carb

Ad

Question about Husqvarna Garden

1 Answer

full throttle. Spark plug if good shape and put freash gas and oil also the air filter is clean. Hi, bring the hi speed mixture screw out approximately one eighth of a turn and retry. Hope this helps,

...plug ! carb jets are probably rusted or clogged due to ethanol gas. I recomend replacing the carb. Will take adjustment once replaced, but a $25 dollar solution is cheaper than buying a new

...full throttle. I thought it was bad gas, emptied the tank and ran almost a full tank with no problem, the next day it has the same full throttle problem. do you mean high rpms? do you try the 2 ...

Question about Husqvarna Garden

1 Answer

...Chainsaw will start but then at full throttle bogs down and shuts off, at half throttle feathering the trigger at half throttle still wants to shut off then finally shuts off completley and will not ...

...gas, but didn't fix the problem. Jets in chainsaw may have build-up. A good build-up remover is called SeaFoam. Add this by direction to the gas. When using the SeaFoam you need to run full throttle ...

...when in full throttls bogs down Check and make sure air filter is clean.Adjust the high speed jet when it is at full throttle.If that does not work you will have to either rebuild or replace

Question about Husqvarna Garden

1 Answer

...full throttle with little power except when i pump the prime bulb about once every two seconds, while it's running,then it speeds up.the saw is less than a year old. The problem could be a plugged ...

...gas chainsaw that has always cranked and run perfectly. Now it will start and idle but dies when the throttle is squeezed. I last used it about 3 weeks ago and it ran fine. I did dump the fuel and ...

Not finding what you are looking for?
Poulan PP4218AV 18" Chain Saw Logo

49 questions posted

Ask a Question

Usually answered in minutes!

Top Poulan Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Poulan Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...