Question about Coleman Electrical Supplies
...idle does not go to low idle when there is load on the generator it has idle control. I could not understand, it doesn't go in low idle when load is connected or no? It should go to low speed idle ...
...will not idle down most cheaper generators do not have a idle kick down and are made to run at 1850 rpm's the older ones run at 3600 rpm if it has a no load idle system there will be a ...
not. 4 - If the generator revs up when you turn the idle control off, but won't do it automatically when current is drawn with it turned on you need to check the current transformer with an ohm meter.
...idle control not working. I have a Generac 4000xl that sat for about a year. I replaced the oil, filter, fuel, charged battery etc. The unit starts and runs but my idle control doesnt do anything ...
Question about Honda Electrical Supplies
...not idle down Reddy 10000 watt generator with 20 hp Honda motor. With auto idle off it will run at genarator full rpm. Turn on auto idle and it starts to reve up and down. Have not been able to fine ...
Question about Makita Electrical Supplies
...idle does not work propertly on makita g 6101 generator When I turn on the auto idle switch with no load connected to the generator the engine down its speed but not constantly. Its start increasing ...
Question about Northstar Electrical Supplies
not automatically idle up when demand for power does produce power when manually setting engine speed. Check your idle solenoid by applying 12Vdc. If it moves then the solenoid is fine. This means you
Question about BlueStar Electrical Supplies
around their current transducer (the small doughnut shaped piece with wires running through it within the machine, normally they are red) if not that then yep, Idle control, linkage, or PC board issue
idle it will not change the speed to normal. It idles at high speed all time. If you have anything plugged into the generator, consuming any electric, it will run at high. It must run at high speed to
...not go down to idle when no load Generator does not go down to idle when no load applied. Auto idle switch ok and idle control module replaced with no change. Check the idle control rod Is it bent or ...
162 questions posted
Usually answered in minutes!
4 Questions
