Briggs & Stratton Power Products 5,550 Watt Portable Generator #30241 "low oil" Questions

Ad

...low oil sensor aan a digital inverter generator Look on the engine block . There should be a wire on it to the engine ignition magneto.If the engine runs the low oil sensor is not the problem. If the ...

Ad

Question about Onan Electrical Supplies

1 Answer

...low oil pressure shutdown switch. First check the oil level. If oil level is low, fill oil to proper level. If oil level is fine, I would install an auxiliary oil pressure gauge . If oil pressure is ...

Ad

low oil switch? It ran before we changed plug and oil, now it won't start. how do you reset or check the low oil off switch? Nancy, If you think this is the problem, simply unplug it. See links below.

Question about Electrical Supplies

1 Answer

...low oil level sensors that are quite fussy about their orientation. If there are any inclinds a generator is sitting on you can get FALSE low oil level shut downs. You must make sure the generator is ...

Question about Mi T M Electrical Supplies

1 Answer

...low oil sending unit or oil level low or dirty oil (some generators have a fuel cut-out solenoid at the carb ). Key switch will override the low oil safety. Easy test, remove wire from oil sending ...

Question about Coleman Electrical Supplies

1 Answer

...low oil alert module ? Generator just stopped after an extended run (360-40 hours). Crank will turn, but Engine will not kick in / turn. I believe i knocked the low oil module. Yes , if there is an ...

Question about Coleman Electrical Supplies

1 Answer

low oil shut down make sure the oil if filled to the proper full level. If you have the proper level then you can locate the low oil shut down wire and remove the wire to test and see if the unit will

Question about Coleman Electrical Supplies

1 Answer

low oil sensor With the Sandy bearing down on the east coast i need to get my Coleman PM0435001 generator running. It wont start. How can i disconnect the low oil sensor? By the way there is plenty of

Question about Caterpillar Electrical Supplies

1 Answer

what is the cause of low oil pressure in the generator Low oil pressure can be wrong oil viscosity, blocked or incorrect oil filer, and off course defective oil pump

...plug make sure that the ignition switch is in the on position check for low oil in the sump check that the low oil level indicator is operational as it stops spark when the oil is too low or has ...

Not finding what you are looking for?
Briggs & Stratton Power Products 5,550 Watt Portable Generator #30241 Logo

162 questions posted

Ask a Question

Usually answered in minutes!

Top Briggs & Stratton Electrical Supplies Experts

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66977 Answers

Are you a Briggs & Stratton Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...