...chainsaw 10'' - Chain is loose. Where do I tighten it? Thanks Ros loosen the two nuts that hold the chain cover on. Once they are just loose, then use a flat blade screw driver to turn the slot that ...
Question about Makita Garden
...come loose that fast , and is not a cause of a weak bar bolt slipping , for sure is caused by improper oiling of chain and its overheating , heat makes metal expand so chain goes slack if it gets ...
...chain too loose. The chain should be snug al the way around the bar. If it is run loose for too long the chain will develop burs on the driver links. Now the driver link will not fit in the groove on ...
chain keeps coming loose and falling off. I have retightended it but it keeps coming loose after about 1 minute of operation. what is going on? and how do i fix it? 2 options: Change for a new chain -
...move. Please help. I put a new bar and chain on my craftsman 18" chainsaw because the chain keeps coming loose. I am still having the same problem, after running 10 seconds, the chain falls
...chainsaw. the chain comes loose or comes off after just a few cuts. am i missing something or could it be a malfunction It sounds like the chain is not being set quite tight enough. Turn the ...
...chainsaw husky 20inch bar chain keeps coming off new chain You may have a bent bar, or you could be putting the chain on a little too loose. Perhaps the chain is not getting lube ? Possible that the ...
...chainsaw and just replaced the bar and chain. Tighten chain and brake nuts and after a few seconds of cutting the bar is shaking and the chain is loose. Switched back to the old bar and chain and got ...
Question about BLUE MAX Garden
...chainsaw chain on my Blue Max chainsaw. The kick-back seems to be locked Bob take the chain off again and remember to tighten the tensioning bar so that the chain is slightly loose. Enough to pull a ...
76 questions posted
Usually answered in minutes!
295 Questions
300 Questions
122 Questions
96 Questions
40 Questions
