LG RC897T DVD Recorder/VCR Combo "player door opens slide" Questions

...door is??? Hi Tony Thanks in advance for your rating. The eject button is a slide type (not a push). you should slide it to right to open the lid, which is the rectangular part in the middle on top ...

...door opens and closes dvd player may be faulty if the DVD tray wont open the disc is stuck inside try Turing it off by the power point wait 3 seconds then back on if disc still doesn't come out (YOU) ...

...Door having a hard time opening Dust and/or dirt sometimes causes the doors not to slide easily. A Qtip with isopropyl alcohol will usually remove this from the slide points. A little WD 40 helps to ...

player but the door still opened. This isn't cool because its a hired DVD. I tried the conventional method of getting it out by sliding a knife under the disc but now the disc has slid to the back and

...the door at all. It comes on, just won't open the door and says, no disc. nancy There's a slot on the bottom where you can insert a small slotted screwdriver and slide it to the left to get it

...player and turn it on. It keeps saying Stand by mode and then the power turns itself of. How can I get it too work. If the unit does not see the door switch (the door where the disks are inserted) it ...

...not open to eject dvd l1 message appears how can I open the tray there is a TINY hole near the edge of the slide-out door. stick a tooth pick or paper clip gently in this hole the door will pop

...player wont open try a paper clip opened and put on dvd door hole (small hole), and push slowly the paperclip inside and realease the dvd door to open, normaly is a defective dvd laser mec. and needs ...

...Door won't open. There is an emergency ejection slot on the bottom of the unit. insert a small screwdriver in the slot and slide in the direction indicated. this will unload the DVD. Now pull drawer ...

...player and I can't even get the door to open and try to play a disk. it seems to make a funny noise and the two circle lights come on then it just shuts down. Thing has never been used. any ideas how ...