...to an amplifier, receiver or processor. The best way is to connect the subwoofer to the SUB OUT or LFE output of a receiver, but some subwoofers can be connected to the speaker level outputs of the ...
Question about Onkyo Audio Players & Recorders
Cannot get my LFE output to send signal to my powered subwoofer from a sr706. Subwoofer is in working order verified by pluging a CD changer directly into the inputs (and LFE) on the subwoofer. In ...
lfe input on my sub and nothing. the volume is up on both receiver and sub. The green light (indecating the sub has a connection) is on dolby digital is on the receiver and still nothing. i have tried
...there's either an amplified channel marked for LFE or Subwoofer that would connect directoly to a subwoofer or there's a single RCA jack for same that would go to the input of an amplified
2 input options being left or right input. Which one should i use?? Since there are only two choices you could quickly try each of them. Or feed them both with the single LFE input and an RCA splitter
...input. Under Speaker Setup you have to have Subwoofer set to YES (page 16). If you have good bass-capable main speakers I would recommend setting the subwoofer playback mode to LFE+Main, otherwise ...
...has a "Subwoofer pre-out" out. My subwoofer has three possible inputs under "Line Level In." 1. is LFE and the speaker manual says if receiver has LFE or subwoofer out to connect here. 2. and 3. are ...
LFE signals are sent through the front speaker channels and you will get the same BASS output as if using the line-level input. O So yes it does require a bit more speaker cable, but it works fine now
Question about Denon Audio Players & Recorders
...LFE to LFE input to the sub... I have a velodyne which has always worked great. Connected the sub with the original wire to my sony amp and it works great so it's the output on the amp. Any ...
...input or output of the line level? All my speakers are connected to the Denon receiver. Please advise, thanks. Get an RCA Y-adapter to feed both INputs on the sub. Define the sub in the Denon and set ...
44 questions posted
Usually answered in minutes!
192 Questions
173 Questions
140 Questions
146 Questions
92 Questions
