Carrier 38CKC036 Air Conditioner "blower making loud noise" Questions

...unit. if it too loud on stat--up at outside your system is overcharged. Your compressor kicking with liquid Freon on the compressor head. if is too inside check for any loose on your blower

...making very loud whirring noises tonight. I quickly shut it off, and once the burners went out, the noise stopped (blower was still going). I waited a few minutes and turned it back on. Once the ...

...a electric furnace and oil heat but when may furnace shuts down it makes a loud noise then stop what could the be make sure the blower is working i believe that what make that noise. ...

...loud Hi, Check the blower for dirt build up...often it will build up and then part of the dirt will fall off throwing the blower out of balance and creating alot of noise like you have described...if ...

making noise the blade or blower wheel is either hitting something or the bearings in the motor are bad and the motor needs to be replaced. Have you checked the air filter? You could also have a loose

blower makes a loud buzzing noise. Could it be sticking or a bad capacitator? At times I may put my hand in the blower and spin it to get it going. hello, sounds like you capacitor is bad and needs to

squirrel cage fan motor noise the inside fan motor makes a loud noise. Could be bearings going out, or a squirrel cage rubbing the blower housing, a squirrel cage blade that came loose, or a capacitor

...making a loud noice from the furnace closet which is upstairs. 2 different ac repair companies came out but could not find anything wrong. The line to the outside machine froze and then stopped ...

...blower. it isnt banging or making any metal on metal sound, just a 'whirring' sound. Hi, One way to reduce the sound it makes is by placing styropor insulation around the unit. Although a better way ...

making a loud noise like it is rubing/vibrating and then at times runs quite Hello, make sure the blower wheel is clean and that it is moving freely, if it feels loose on the motor shaft then you will