...door "locks" or is hard to open, if opened a few minutes prior? This is normal. Freezers have a vent port to let high moisture out. When you open the door moisture laden air enters. When the door is ...
Door on new Kenmore freezer hard to open ... could this be a leveling problem? I wouldn't think it is an ice build-up problem since the freezer was only installed last Friday (9/24) and the ice maker ...
Question about Frigidaire Freezers
...door to be very hard to open and could pull the door closed too quickly. Most manufactures today use small air valves the open and release as the door is being opened and closed. They are most often ...
...hard freeze on top soft freeze on bottom upright 7.5 freezer door gasket sealing properly kids hanging with door open? condenser clean? if its a forced air condenser if it is a static freon problem. ...
Question about Maytag Freezers
...door to make it move, which moves smooth and quiet. But only to open with control set or cold, or, damper goes to full closed with control set to warm. Once in position, the damper won't move again ...
Question about Thermador Freezers
...door seals so hard after being opened that you can't open it again. Why? Also Sometimes after opening it makes this weird gurling/bubbly noise. thermodynamics: pressure differential when warm air ...
...hard to open, usally caused be barometric pressure, hot air goes in, cold inside unit compensates when door closes causing a vaccum. If door wont close, sheck your draws or shelves, may be misplaced ...
...door gets hard to open unless you wait 4 minutes. While investigating this I discovered that there is a buildup of ice in the trough behind the icemaker. It appears that the drain line is stopped up ...
door and shut it. It should be a little hard to pull the bill out. Do this all over the door and find all the bad places. One problem is that the door can become warped by banging it against something
Question about True Freezers
...door on a unit like that, it should be really hard to open straight afterward due to the suction.
Could be a faulty thermostat. Turn the temperature to the warmest setting and see if it still ...
2 questions posted
Usually answered in minutes!
188 Questions
75 Questions
44 Questions