1996 Jeep Cherokee Sport "96 head" Questions

Ad

...96 That depends on which engine you have. On v8 engines you need to put a wrench on the tensioner pulley and pull it over. On six cyl and four cyl engines there is an adjustment bolt on the power ...

Ad

...low beams on my 96 jeep charokee sport the lo beams don't work when I turn the lights on...but the high beams do....tried changing the head lights still nothing check dimmer switch on steering ...

Ad

Question about Jeep Cherokee

1 Answer

...96 jeep cherokee sport 6 cylinder. I'm pretty sure the head gasket is blown. I was wondering if it is overhead cam because i was thinking about fixing it myself (well having my buddy who is good ...

...96 Jeep Cherokee Country. Did some research and hoped I had narrowed it down to the Throttle Body Sensor. I disconnected the electrical connector to the sensor and that solved the stalling, but Jeep ...

where is the freeze plug on a 96 jeep cherokee i would like to put a block heater in but im not sure where its suppose to go The freeze plugs are on the engine block and some on the cylinder ...

...96 cherokee 4.0L. The owner had overheated it and blown the motor. Water pump (reverse rotation) and radiator also are new, and the thermostat has been removed. It ran fine for the first day, (was ...

Question about Jeep Cherokee

2 Answers

96 jeep cherokee 2.5 td. On the motorway the other day the water temp gauge shot up then off thenthe check engine light came on and the engine died. Now it cracks but wont start sounds like thre is no

Question about Jeep Cherokee

1 Answer

96 jeep grand cherokee 8 cyl. 5.2l, I have changed the o2 sensor, fuel filter, catalytic converter and it still surges like its running out of gas, usually once car has warmed up or I've idled too

Question about Jeep Cherokee

1 Answer

96 grand cherakee 4.0 motor Hello, different size, grade, thread size, application will always have something to do the torque specification of bots, nuts, plug etc. Remember, to get the proper torque

96 jeep cherokee se replaced head light pull switch replaced pull switch because lights began to flicker. Found that If I pulled switch out slowly, the running lights would light, but only in certain ...

Not finding what you are looking for?
Cars & Trucks Logo

337 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Jeep Cherokee
1998 Jeep Cherokee

1,380 Questions

1999 Jeep Cherokee
1999 Jeep Cherokee

1,162 Questions

1995 Jeep Cherokee
1995 Jeep Cherokee

698 Questions

2000 Jeep Cherokee
2000 Jeep Cherokee

672 Questions

2001 Jeep Cherokee
2001 Jeep Cherokee

659 Questions

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...